Oil Pump for 1979-1985 Ford Mustang & More - Melling M-86CHV

$203.99

Vehicles this part fits

    Part number: M-86CHV
    UPC: 729295101581
    Condition: New
    Weight: 5.30 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $203.99
    Adding to cart… The item has been added

    Have questions?

    Melling Engine Oil Pump P/N:M-86CHV
    Melling Engine Oil Pump P/N:M-86CHV
    $203.99
    $203.99

    Melling M-86CHV oil pump for the 1979-1985 Ford Mustang 4-cylinder 2.3L and other vehicles supplies extra oil volume to help oil pressure at idle. This Melling high volume oil pump, also called an engine oil pump, is a standard-pressure gear pump built for stock replacement.

    • Adds 25% volume over stock for engines with low oil pressure or high-performance use
    • High volume gears machined to close tolerances for proper engine pressure and efficient pump operation
    • End plates precision ground for wear resistance
    • Each pump is individually tested for pressure and flow under conditions designed to duplicate engine operation
    • Cast iron housing and cover with steel gears and a rust-preventative finish

    Quick facts

    • Part: Melling M-86CHV oil pump
    • Also called: engine oil pump
    • Fits: 1979-1985 Ford Mustang 4-cylinder 2.3L and other vehicles
    • Material: cast iron housing and cover, steel gears
    • Condition: New

    A worn oil pump can show up as a low oil pressure reading, an oil pressure warning light or engine noise at idle. These signs alone do not prove the pump is at fault, since a low oil level can cause them too.

    Fits

    This gear-type oil pump is a direct-fit replacement for the 1979-1985 Ford Mustang 4-cylinder 2.3L, the 1983-1985 Ford Ranger 4-cylinder 2.3L and the 1983-1988 Ranger 4-cylinder 2.0L, and the 1983-1988 Ford Thunderbird 4-cylinder 2.3L. A 1983-1988 Thunderbird 4-cylinder 2.3L takes one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Pickup tube diameter and inlet size: 14.00 mm (0.550 in)
    • Mounting hole diameter: 10.0 mm (0.375 in), 2 mounting holes
    • Height: 85.0 mm (3.35 in)
    • Width: 123.0 mm (4.86 in)

    Build and materials

    • Type: gear, high volume, standard pressure, wet sump, internal
    • Drive type: drive shaft
    • Housing and cover material: cast iron
    • Gear material: steel
    • Finish: rust preventative
    • Condition: new
    • Country of origin: United States

    In the box

    One oil pump with its pump cover and gears. The pickup screen, gasket or seal, drive shaft, bolts, washers and O-ring are not included; plan on new bolts, since the old ones may not be reusable.

    Interchange: A-86CHV · 41-160HVU · B-86CHV · DM-86CHV · EM-86CHV · MM-86-CHV · 601-1123 · OP-86-CHV · 224-41160HV · 224-41160V · WG-539X
    OP241HV · HM86CHV · P86CHV · 50121

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    A-86CHV, 41-160HVU, B-86CHV, DM-86CHV, EM-86CHV, OP241HV, HM86CHV, MM-86-CHV, 601-1123, P86CHV, OP-86-CHV, 224-41160HV, 224-41160V, 50121, WG-539X

    Frequently Asked Questions

    Is this a Ford Ranger oil pump for the 1983-1985 Ranger 4-cylinder 2.3L and the 1983-1988 Ranger 4-cylinder 2.0L?

    Yes, Melling M-86CHV fits the 1983-1985 Ford Ranger 4-cylinder 2.3L and the 1983-1988 Ranger 4-cylinder 2.0L, and each takes one. Check other years in the "Vehicles it fits" section.

    Is this a Mustang oil pump for the 1989 Ford Mustang 4-cylinder 2.3L?

    Yes. Melling M-86CHV fits the 1989 Ford Mustang 4-cylinder 2.3L as well as the 1979-1985 Mustang 4-cylinder 2.3L, and the car takes one pump.

    Does this Melling oil pump include the pickup screen and gasket?

    No. This oil pump comes with its pump cover and gears; the pickup screen, gasket or seal, drive shaft, bolts and washers are not included, so plan on new bolts.

    Is this a Melling high pressure oil pump?

    No, the M-86CHV is a high volume pump with standard pressure that adds 25% volume over stock, and its bypass pressure is not adjustable.

    Does the M-86CHV replace oil pump number 224-41160HV?

    Yes. Melling M-86CHV replaces 224-41160HV, and the Interchange line on this page lists the other numbers it replaces too.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review