Monroe Shocks & Struts Air Shock Absorber P/N:MA817
Monroe Shocks & Struts MA777 rear shock absorber for the 1992-2002 Ford E-150 Econoline and other vehicles uses an adjustable air chamber to help keep the vehicle level when carrying extra weight. It is intended for hauling.
A rear end that sags under load, bounces over bumps or shows oil on the shock body can point to a worn shock absorber. These signs alone do not prove the shock is the problem, since tired rear springs can make a vehicle ride low too.
This rear air shock absorber fits the 1992-2002 Ford E-150 Econoline, the 2002-2007 Ford E-150 and the 1999-2006 Ford Econoline. It is sold as a pack of 2, with a quantity of one per application. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
A pack of two rear shock absorbers, with the dust shield and boot included.
Interchange: 49178
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Monroe MA777 rear air shock fit a 1992-2002 Ford E-150 Econoline?
Yes. Monroe Shocks & Struts MA777 is a rear shock absorber listed for the 1992-2002 Ford E-150 Econoline and also for the 2002-2007 Ford E-150.
How much air pressure can the MA777 air shock take?
The air chamber can be inflated or deflated up to 150 PSI to maintain level height with up to 1,200 lbs of added weight. Suspension, tires and transmission limit the capacity.
Does the Monroe MA777 come with a dust shield and boot?
Yes. The Monroe MA777 rear air shock absorber includes a dust shield and a boot.
Can I fill this air shock with a regular air compressor?
Yes. The special air fitting inflates manually with an air compressor, or ties into a factory air system where applicable. Accessory and air hose kits vary by application.
What mounts and lengths does this rear shock absorber have?
The upper end is a stem mount (2.3/8 stem length, 3/8-16 thread pitch) and the lower end is a loop bushing and sleeve mount. It measures 12.5 in compressed and 20.5 in extended, with 8 in of travel.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.