Monroe 32269 rear shock absorber for the 1993-1998 Jeep Grand Cherokee controls rear spring movement to keep the ride steady. This Monroe shock absorber has a nitrogen gas charge and meets OE specifications.
- Monro-Matic Plus line with Velocity Proportional Valving (VPV) and all-weather fluid with friction-reducing additives
- Nitrogen gas charge reduces aeration and helps keep the tire in contact with the road
- Self-lubricating fluid seal retains gas and reduces friction against the piston rod
- Banded piston and bronze reinforced guide for durability
- Larger bore for more efficient damping control, where applicable
Quick facts
- Part: Monroe 32269 shock absorber
- Fits: 1993-1998 Jeep Grand Cherokee
- Position: Rear
- Condition: New
A worn rear shock absorber can show up as extra bounce after bumps, a clunk or rattle from the rear, or an oily film on the body. Before you replace this shock absorber, rule out worn mounts or bushings as the source of the noise or bounce, since they can feel similar.
Fits
This shock absorber fits the 1993-1998 Jeep Grand Cherokee, which takes two, one on each side of the rear axle. This listing is one shock absorber; the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Compressed length: 13.375 in (339.7 mm)
- Extended length: 21.5 in (546.1 mm)
- Travel length: 8.125 in
- Lower mount: loop (eyelet) bushing and sleeve, 12MM sleeve ID X 1.7/16 sleeve OAL
- Upper mount: loop bushing, 5/8 bushing ID X 1.5/16 bushing OAL
Build and materials
- Type: gas-charged, passive, non-adjustable
- Internal rebound bumper: yes
- Dust shield: metal, included
- Condition: new
- Country of origin: United States
In the box
One shock absorber with its dust shield. Mounting hardware is not included, so plan on new hardware; the old pieces may not be reusable.
Interchange: TS3333742B · TS3432552B · TS3432772B · 61575 · 81891 · G63626 · G63683 · 4723036 · 344396 · KG5487 · JP107 · 59356 · SH81891 · 94134 · 12140140
This part cross-references / interchanges with the following part numbers:
TS3333742B, TS3432552B, TS3432772B, 61575, 81891, G63626, G63683, 4723036, 344396, KG5487, JP107, 59356, SH81891, 94134, 12140140
Frequently Asked Questions
Is this a Jeep Grand Cherokee shock absorber for the 1993-1998 model years?
Yes. Monroe 32269 is a rear shock absorber for the 1993-1998 Jeep Grand Cherokee. Each vehicle takes two, one on each side of the rear axle.
Does this Monroe car shock absorber come with mounting hardware?
No. The Monroe 32269 comes with its metal dust shield but no mounting hardware, so plan on getting new hardware for the install.
What are the compressed and extended lengths of the Monroe Monro-Matic Plus shock absorber?
This shock absorber measures 13.375 in (339.7 mm) compressed and 21.5 in (546.1 mm) extended, which gives 8.125 in of travel.
Does this rear shock absorber have a nitrogen gas charge?
Yes. Monroe 32269 is nitrogen gas-charged, which reduces aeration and helps keep the tire in contact with the road.
What can an oily film on a rear shock absorber body mean?
Fluid on the body can mean the seal has started to leak, and a leaking shock may not damp the way it should. A shop can inspect it and confirm.
