Monroe Shocks & Struts 911259 front shock absorber for the 2004-2009 Dodge Durango and other vehicles damps spring movement to control wheel bounce over bumps. This Monroe OESpectrum shock is designed to restore the original factory drivability and performance of the vehicle.
- Monroe OESpectrum light truck shock absorber line
- All-weather fluid with additives for extreme temperatures that help reduce oil breakdown
- Nitrogen gas charge keeps the tire in contact with the road by reducing aeration and shock fade
- Loop bushing and sleeve mounts at the upper and lower ends
- Metal dust shield included
Quick facts
- Part: Monroe Shocks & Struts 911259 shock absorber
- Fits: 2004-2009 Dodge Durango and other vehicles
- Position: Front
- Condition: New
A front end that keeps bouncing after bumps, dives under braking or wears tires unevenly can mean a worn shock. These signs alone do not prove the shock is the problem, since a worn coil spring can cause similar symptoms.
Fits
It fits the 2004-2009 Dodge Durango and the 2007-2009 Chrysler Aspen, and each takes two. This listing is one front shock; the other front side is normally done at the same time.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Compressed length: 11 in (279.4 mm)
- Extended length: 16 in (406.4 mm)
- Travel length: 5 in
- Upper mount: loop bushing and sleeve, 12 mm sleeve ID x 44.45 mm sleeve OAL
- Lower mount: loop (eyelet) bushing and sleeve, 12 mm sleeve ID x 1.1/4 sleeve OAL
- Measuring points: center of loop at both ends
Build and materials
- Type: gas-charged, passive suspension
- Cylinder: painted black
- Dust shield: metal, included
- Condition: New
- Warranty: Monroe Limited Lifetime Warranty
- Country of origin: Viet Nam
In the box
One shock absorber with its metal dust shield. Mounting hardware is not included, so plan on new hardware rather than reusing the old.
Interchange: 52113183AB · TS3431561B · 342840 · G64016 · KG4160 · DG107 · 210452 · 32405 · NS911259 · RS5388 · RS55388 · 12140163
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
52113183AB, TS3431561B, 342840, G64016, KG4160, DG107, 210452, 32405, 911259, NS911259, RS5388, RS55388, 12140163
Frequently Asked Questions
Is this absorber the right one for the 2007-2009 Chrysler Aspen?
Yes. Monroe Shocks & Struts 911259 is a front shock absorber for the 2007-2009 Chrysler Aspen and the 2004-2009 Dodge Durango. Each of those takes two, one per front side.
Does the Monroe 911259 shock come with its mounting bolts?
No. Monroe Shocks & Struts 911259 comes as the shock with its metal dust shield; mounting hardware is not included, so plan on new hardware instead of reusing the old.
How long is the Monroe 911259 shock when compressed and extended?
This front shock measures 11 in (279.4 mm) compressed and 16 in (406.4 mm) extended, with 5 in of travel, measured from the center of the loop at each end.
How can I tell if a front shock like this is worn?
Fluid wetness on the shock body, dents, or a ride that keeps bouncing or dives when braking can point to wear. A shop can confirm whether the shock needs replacing.
Is the OESpectrum 911259 a gas-charged shock?
Yes. This front shock has a nitrogen gas charge that reduces aeration and shock fade, and it is filled with OE all-weather fluid.
