Monroe Shocks & Struts 72766 front left suspension strut for the 2011-2013 Toyota Highlander and other vehicles damps front left wheel movement and filters out noise, vibration and harshness.
- Monroe OESpectrum line, with valving and technology matched to each application
- Twin Technology Active Control System isolates impact-related noise, vibration and harshness
- Rod displaced valving tuned to each vehicle for consistency and a smooth ride on most applications
- PTFE-banded piston seals evenly between the piston and the pressure tube
- Nitrogen gas charge reduces aeration to keep the tire in contact with the road on most applications
- Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal, where applicable
Quick facts
- Part: Monroe Shocks & Struts 72766 suspension strut
- Fits: 2011-2013 Toyota Highlander and other vehicles
- Position: Front left
- Condition: New
A worn strut can show up as clunking over bumps, a bouncy ride, fluid on the strut body or uneven front tire wear. These signs alone do not prove the strut is the problem, since a worn sway bar link can make similar noises. Replace the front struts as a pair; this listing is one strut for the front left, and the front right is a separate part. The 2011-2013 Toyota Highlander takes one strut on the front left.
Fits
This front left suspension strut fits the 2011-2013 Toyota Highlander, the 2010-2015 Lexus RX350 and the 2010-2015 Lexus RX450h.
Specifications
Fit and size
- Position: front left
- Quantity per application: 1
- Compressed length: 16.26 in (413 mm)
- Extended length: 22.44 in (570 mm)
- Travel length: 6.18 in
- Body length: 15.76 in
- Upper mount code: 157
Build and materials
- Type: gas charged, passive suspension
- Adjustment: no adjustable compression, rebound or ride height
- Piston: PTFE-banded
- Condition: new
- Warranty: Monroe limited lifetime warranty
- Country of origin: Viet Nam
In the box
One front left suspension strut. The strut mount, coil spring, dust shield and mounting hardware are not included, so plan on new hardware. The dust boot and jounce bumper are sold separately.
Frequently Asked Questions
Are these struts for the 2011-2013 Toyota Highlander made for the front left?
Yes. Monroe Shocks & Struts 72766 is a front left suspension strut for the 2011-2013 Toyota Highlander; the front right side takes its own strut.
Is this one of the 2011-2013 Toyota Highlander shocks and struts?
Yes, as a strut. This listing is one suspension strut, not a shock absorber, for the front left of the 2011-2013 Toyota Highlander; the front right strut is ordered separately.
Does this strut come with the strut mount and coil spring?
No. Monroe 72766 is the strut only. The strut mount, coil spring, dust shield and mounting hardware are not included.
What are the compressed and extended lengths of the Monroe 72766 strut?
Monroe 72766 measures 16.26 in (413 mm) compressed and 22.44 in (570 mm) extended, with 6.18 in of travel.
Is this front left strut gas charged?
Yes. This front left strut has a nitrogen gas charge that helps keep the tire in contact with the road by reducing aeration on most applications.
