QuickSteer DS1163 front right outer tie rod end for the 1989-1997 Ford F-53 Motorhome Chassis and other vehicles connects the steering linkage to the wheel's steering knuckle. Replacing a worn one helps restore vehicle handling.
- QuickSteer chassis part, designed and tested to restore steering and handling to original performance
- Greaseable socket lets new lubricant flush out contaminants, reducing corrosion and wear
- Precision tolerances for easy installation and steering alignment
- Forged alloy steel construction for durability
- Tested by engineers throughout design and development
Quick facts
- Part: QuickSteer DS1163 tie rod end
- Also called: steering tie rod end
- Fits: 1989-1997 Ford F-53 Motorhome Chassis and other vehicles
- Position: Front right outer
- Material: Forged alloy steel
- Condition: New
A worn steering tie rod end can show up as loose or wandering steering, a clunk over bumps or uneven front tire wear. Tire condition and alignment can cause some of these too, so find the cause before you buy. With the engine off, look over the steering linkage for a torn boot, leaking grease or cracks; a shop can check for play.
Fits
This tie rod end fits the 1989-1997 Ford F-53 Motorhome Chassis, the 1988-1997 Ford F-Super Duty and the 1989-1994 Ford F-59 Commercial Stripped Chassis. The front right position takes a single tie rod end, and the part is designed for OE fit and function. This listing is one tie rod end for the front right; the front left is a separate part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: Front right outer
- Quantity per vehicle: 1
- Thread diameter: 1.250 in
- Threads per inch: 16
- Thread direction: Clockwise
- Rod type: Female
Build and materials
- Type: Straight
- Material: Forged alloy steel
- Socket: Greaseable
- Condition: New
In the box
One tie rod end. The dust boot is not included.
Frequently Asked Questions
Does the QuickSteer DS1163 tie rod end fit the 1988-1997 Ford F-Super Duty?
Yes. QuickSteer DS1163 is a front right outer tie rod end for the 1988-1997 Ford F-Super Duty, and that position takes one.
What thread size does the DS1163 outer tie rod end have?
The QuickSteer DS1163 has a female end with a 1.250 in thread diameter and 16 threads per inch. The thread direction is clockwise.
Does the front right outer tie rod end come with a dust boot?
No. The dust boot is not included; this listing is one front right outer tie rod end.
Is the socket on this QuickSteer tie rod end greaseable?
Yes. The greaseable socket lets new lubricant flush out contaminants, which reduces corrosion and wear.
How can I tell if a front right outer tie rod end is worn?
Loose or wandering steering, a clunk over bumps or uneven front tire wear can mean a worn tie rod end. A shop can check the joint for play.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review