Squeeze the pads against the rotor from both sides at the front right wheel with the Nugeon remanufactured disc brake caliper 97B17724A from TERREPOWER (BBB), a fixed four-piston unit. It is listed for several models, among them the 2012-2016 Dodge Charger, 2006-2010 Jeep Grand Cherokee and 2012-2020 Chrysler 300. Listings include all engines as well as V8-5.7L, V8-6.1L and V8-6.4L engine applications; see the Buyer's Guide tab for the full list.
Brake pads, the mounting bracket, bracket mounting bolts, the caliper mounting bolt, caliper slides, anti-squeal shims, caliper and pad hardware, wear sensors and a bleeder screw cap are not included. Transfer or replace these parts as the service procedure directs, and consult the vehicle service information for the correct fasteners and whether they may be reused. Bleed the brake system after installation.
This listing is for one front right caliper, and the listed applications use one per vehicle in that position. Replacing the calipers on both sides of the axle together is recommended for even, balanced braking. Country of origin: Mexico.
Is this a 2012-2016 Dodge Charger brake caliper?
It is listed as the front right caliper for the 2012-2016 Dodge Charger. Check the Buyer's Guide tab for other listed years and your engine.
Does this 2006-2010 Jeep Grand Cherokee brake caliper also fit the 2012-2020 Chrysler 300?
Yes. It is listed in the front right position for both the 2006-2010 Jeep Grand Cherokee and the 2012-2020 Chrysler 300. The Buyer's Guide tab shows every listed application.
What comes in the box?
The caliper, its bleeder screw, dust boots and crush washers. Pads, the bracket and its bolts, the mounting bolt, slides, shims, pad hardware and wear sensors are not included.
What are signs a brake caliper may need replacing?
Common signs are brake fluid leaking at the caliper, pulling to one side, a dragging brake or uneven pad wear. Diagnose the cause first, because other brake parts can cause similar symptoms.
What are the caliper's key specs?
It is a fixed, four-piston aluminum caliper with aluminum pistons and a listed piston diameter of 44 mm (1.732 in). It has an M8-1.25 bleeder, an M10-1.0 banjo-bolt inlet and a black powder-coated finish.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
