Remanufactured Rear Right Brake Caliper for 1995-2001 Nissan Maxima & More - Nugeon 99-00549A

$122.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-00549A
    UPC: 736749359740
    Condition: Refurbished
    Weight: 7.10 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $122.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-00549A
    Nugeon Disc Brake Caliper P/N:99-00549A
    $122.99
    $122.99

    Nugeon 99-00549A rear right brake caliper for the 1995-2001 Nissan Maxima and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured caliper is a floating design.

    • Cast iron housing with a rust preventative finish
    • One steel piston, 34 mm (1.34 in) in diameter
    • Banjo bolt inlet fitting with an M10-1.0 thread
    • Bracket, caliper slides, dust boots and caliper and pad hardware included

    Quick facts

    • Part: Nugeon 99-00549A brake caliper
    • Also called: disc brake caliper
    • Fits: 1995-2001 Nissan Maxima and other vehicles
    • Position: Rear right
    • Material: Cast iron (housing), steel (piston)
    • Condition: Remanufactured

    A sticking or leaking disc brake caliper can show up as pulling to one side, fluid near the piston boot or uneven pad wear. Seized caliper slides, a worn rotor or a collapsed brake hose can cause those signs too, so find the cause first. This listing is one caliper for the rear right; the rear left is a separate part, and both are normally replaced together. The rear axle takes one per side.

    Fits

    This brake caliper for the 1995-2001 Nissan Maxima is a direct-fit replacement on the rear right, and it also fits the 1996-2001 Infiniti I30.

    Specifications

    Fit and size

    • Position: Rear right
    • Quantity per application: 1
    • Pistons: 1
    • Piston diameter: 34 mm (1.34 in)
    • Inlet fitting: banjo bolt, M10-1.0 thread
    • Bleeder screw thread: M10-1.0 (3/8-24)

    Build and materials

    • Caliper type: Floating
    • Condition: Remanufactured
    • Housing material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Caliper manufacturer: Nissin
    • Country of origin: Mexico

    In the box

    One caliper with its bleeder screw and bleeder screw cap and the crush washers. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included; the old mounting bolts may not be reusable, so plan on new ones.

    Interchange / FMSI:

    FMSI: D540

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Is this rear right caliper the right one for the 1996-2001 Infiniti I30?

    Yes. Nugeon 99-00549A fits the 1996-2001 Infiniti I30 on the rear right side. The rear left caliper is a separate part.

    Are brake pads included with this Nugeon brake caliper?

    No. Nugeon 99-00549A comes with its bracket, caliper slides, dust boots, bleeder screw with cap and crush washers, but pads, shims and wear sensors are not included.

    What size is the piston on this rear right caliper?

    This caliper has one steel piston, 34 mm (1.34 in) across. The inlet is a banjo bolt fitting with an M10-1.0 thread.

    Is the Nugeon caliper a floating or a fixed design?

    It is a floating design with one piston and a cast iron housing that has a rust preventative finish.

    Is fluid around the piston boot a sign this rear caliper has failed?

    It can be. Fluid near the boot can mean a leaking caliper, and a shop can inspect the brakes promptly since a leak affects stopping.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review