Nugeon Disc Brake Caliper P/N:99-17883A
Nugeon 99-00824A rear left brake caliper for the 1999-2005 Hyundai Sonata and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper mounts at the rear left wheel.
A stuck or worn disc brake caliper can show up as pulling to one side under braking, a burning smell after a drive, or one rear pad wearing faster than the other. A worn rotor, worn pads or a collapsed brake hose can be behind these signs too, so find the cause before buying a caliper.
The vehicles it fits include the 1999-2005 Hyundai Sonata, the 2001-2006 Kia Optima and the 2002-2006 Kia Magentis, and the rear left wheel takes one caliper. This listing is one caliper for the rear left; the rear right is a separate part, and the two are normally done at the same time. To confirm your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One remanufactured caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washer(s). Brake pads, anti-squeal shims, pad hardware, bracket mounting bolts, caliper mounting bolts, wear sensors and the bleeder screw cap are not included, so plan on new bolts, as the old ones may not be reusable.
Is this caliper for the 1999-2005 Hyundai Sonata the rear left or the rear right?
It is the rear left. Nugeon 99-00824A fits the 1999-2005 Hyundai Sonata on that side; the rear right takes a separate caliper.
Is this the Kia Optima brake caliper for the rear left of a 2001-2006 Kia Optima?
Yes. The 2001-2006 Kia Optima is on the fitment list for this rear left caliper. Open the "Vehicles it fits" section to confirm your engine.
Does the Nugeon caliper come with brake pads?
No. Pads, anti-squeal shims, pad hardware and wear sensors are not included. The bracket, slides, dust boots, bleeder screw and crush washer(s) are.
Is this a floating caliper, and what size is its piston?
Yes, Nugeon 99-00824A is a floating caliper with one steel piston, 33 mm (1.299 in) in diameter. The bleeder screw thread is M10-1.0.
How can I tell if a rear brake caliper is sticking?
Signs can include pulling to one side when braking, a burning smell after a drive, or one rear pad wearing faster than the other. A shop can confirm the cause.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.