TERREPOWER 99-05429A rear right brake caliper for the 2013-2016 Land Rover LR4 and other vehicles squeezes the brake pads against the rotor to slow the wheel. This is a remanufactured caliper, and brake fluid pressure pushes its piston while the floating body pulls the second pad in.
- Single steel piston, 45 mm in outside diameter
- Cast iron housing with a rust preventative finish
- Banjo bolt inlet with an M10-1.0 port thread
- Floating caliper type
Quick facts
- Part: TERREPOWER 99-05429A brake caliper
- Also called: disc brake caliper
- Fits: 2013-2016 Land Rover LR4 and other vehicles
- Position: Rear right
- Material: Cast iron (caliper housing)
- Condition: Remanufactured
A pull to one side, a burning smell after driving or brake fluid near the piston boot can mean this rear right brake caliper is worn, though a worn pad or a damaged brake hose can produce the same signs, so find the cause before you replace it.
Fits
It fits the 2013-2016 Land Rover LR4 and works as a rear caliper for the 2013 Land Rover Range Rover Sport. This listing is one caliper, sold individually: the 2013-2016 Land Rover LR4 takes one on the rear right, while the rear left is its own part, ordered separately, and the two are normally replaced together.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1
- Piston quantity: 1
- Piston outside diameter: 45 mm (1.772 in)
- Inlet fitting: banjo bolt, M10-1.0 port thread
- Bleeder screw thread: M10-1.0
- Housing cast number: 2896/B
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Country of origin: Mexico
In the box
One brake caliper with its bracket, caliper slides, dust boots, bleeder screw, banjo bolt and crush washer. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, bracket mounting bolts and caliper and pad hardware are not included; plan on new bracket mounting bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is this a caliper for the 2013 Land Rover Range Rover Sport?
Yes. TERREPOWER 99-05429A is the rear right caliper for the 2013 Land Rover Range Rover Sport; the rear left side is a separate part.
What comes with the TERREPOWER 99-05429A caliper besides the caliper body?
It includes the bracket, caliper slides, dust boots, bleeder screw, banjo bolt and crush washer. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included.
What size is the piston on this disc brake caliper?
The single steel piston is 45 mm (1.772 in) across. The inlet is a banjo bolt fitting with an M10-1.0 port thread.
What can a sticking rear right brake caliper look like?
Brake fluid near the piston boot, a pull to one side or a burning smell after driving can be signs of a worn or sticking caliper. Have a fluid leak or a pull checked promptly.
Do I need new bolts for the bracket on this caliper?
Yes, plan on new ones. TERREPOWER 99-05429A does not include bracket mounting bolts or a mounting bolt, and old fasteners may not be reusable.
