Front Right Brake Caliper for 2009-2012 Hyundai Elantra & More - Nugeon 99-01834A

$185.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-01834A
    UPC: 736749373562
    Condition: New
    Weight: 10.30 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $185.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-01834A
    Nugeon Disc Brake Caliper P/N:99-01834A
    $185.99
    $185.99

    Nugeon 99-01834A front right brake caliper for the 2009-2012 Hyundai Elantra and other vehicles presses the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper takes the place of a worn unit at the front right wheel.

    • Floating design with a single 57 mm steel piston
    • Cast iron casting with a rust-preventative finish
    • Banjo bolt inlet fitting with an M10 - 1.0 thread

    Quick facts

    • Part: Nugeon 99-01834A brake caliper
    • Also called: disc brake caliper
    • Fits: 2009-2012 Hyundai Elantra and other vehicles
    • Position: Front right
    • Material: Cast iron casting, steel piston
    • Condition: Remanufactured

    Signs a disc brake caliper may be wearing out include the car pulling to one side, a soft pedal and brake fluid around the piston boot. A pull alone does not point to the caliper; a collapsed brake hose is another common cause. This listing is one caliper for the front right; the front left is a separate part, and both sides are normally replaced together.

    Fits

    It is a brake caliper replacement for the 2009-2012 Hyundai Elantra, and the vehicles it fits also include the 2010-2013 Kia Forte and the 2010-2013 Kia Forte Koup.

    Specifications

    Fit and size

    • Position: Front right
    • Quantity for the front right: 1
    • Piston diameter: 57 mm (2.24 in)
    • Piston quantity: 1
    • Bleeder screw thread: M10-1.0
    • Inlet thread: M10 - 1.0, banjo bolt

    Build and materials

    • Condition: Remanufactured
    • Caliper type: Floating
    • Casting material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Country of origin: Mexico

    In the box

    One front right brake caliper with its bracket, slides, dust boots, bleeder screw and cap, crush washers, and caliper and pad hardware. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included, so plan on new bolts rather than reusing the old ones. This listing holds one caliper, and the front right takes one.

    Interchange / FMSI:

    FMSI: D1397

    Frequently Asked Questions

    Is this the right 2009-2012 Hyundai Elantra brake caliper for the front right?

    Yes. Nugeon 99-01834A is a front right caliper that fits the 2009-2012 Hyundai Elantra. If your car is not named here, look it up in the "Vehicles it fits" section on this page.

    Will this work as a 2010-2013 Kia Forte brake caliper?

    Yes. Nugeon 99-01834A fits the front right of the 2010-2013 Kia Forte.

    Does the Nugeon caliper come with brake pads?

    No. Brake pads, anti-squeal shims and wear sensors are not included. The bracket, slides, dust boots, bleeder screw with cap and crush washers are.

    What size is the piston and the bleeder screw thread on this front right caliper?

    The piston is 57 mm (2.24 in) across, and the bleeder screw thread is M10-1.0. The inlet is a banjo bolt fitting with an M10 - 1.0 thread.

    Is this front right caliper a floating type, and what is it made of?

    Yes. This front right caliper is a floating type with a cast iron casting, a steel piston and a rust-preventative finish.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review