Nugeon 99-06308B rear left brake caliper for the 2012-2019 Fiat 500 clamps the pads against the rotor to slow the wheel. This is a remanufactured Nugeon brake caliper, also called a disc brake caliper.
- Floating design with a single steel piston
- Aluminum casting with a rust-preventative caliper finish
- M10-1.0 thread on both the bleeder screw and the inlet port
Quick facts
- Part: Nugeon 99-06308B brake caliper
- Also called: disc brake caliper
- Fits: 2012-2019 Fiat 500
- Position: Rear left
- Material: Aluminum housing, steel piston
- Condition: Remanufactured
A pull to one side, a pad worn more on one side or fluid weeping around the dust boot can mean a piston or slide is sticking. During a brake service, with the car cool, look at the dust boot and pad wear; if the caliper is the cause, this one replaces it. This listing is one caliper for the rear left: the 2012-2019 Fiat 500 takes one on this side, the rear right is ordered separately, and the two sides are normally replaced together.
Fits
This rear left caliper fits the 2012-2019 Fiat 500.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1 on this side
- Piston diameter: 33.86 mm (1.33 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet port thread: M10-1.0
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Housing material: Aluminum
- Piston material: Steel
- Finish: Rust preventative
- Housing cast number: 17926602
- Country of origin: Mexico
In the box
One remanufactured rear left caliper with its bracket, slides, dust boots, bleeder screw, crush washer, and caliper and pad hardware. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1569
Frequently Asked Questions
Is the Nugeon 99-06308B a Fiat 500 caliper for model years 2012-2019?
Yes, Nugeon 99-06308B fits the 2012-2019 Fiat 500 at the rear left; the rear right is a separate part.
Does this Nugeon caliper come with brake pads?
No, brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included; the bracket, slides, dust boots, bleeder screw, crush washer and hardware are.
What thread sizes and piston diameter does this rear left caliper have?
The Nugeon 99-06308B bleeder screw and inlet port are both M10-1.0. Its single piston measures 33.86 mm (1.33 in) across.
Is this caliper aluminum or steel, and is it fixed or floating?
The housing is aluminum with a steel piston. It is a floating caliper with a rust-preventative finish.
Can I keep driving if a brake caliper is leaking fluid?
No. A leaking or seized caliper affects braking, so have the brakes checked or the caliper replaced promptly rather than driving on it.
