Nugeon 99-06313A rear right brake caliper for the 2014-2020 Fiat 500L squeezes the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper replaces the caliper on that wheel.
- Floating caliper design with one steel piston, 38 mm (1.5 in) in diameter
- Aluminum caliper casting with a rust-preventative finish
- Bleeder screw with an M10-1.0 thread
- Inlet fitting for the brake line with an M10 - 1.0 thread
Quick facts
- Part: Nugeon 99-06313A brake caliper
- Also called: disc brake caliper
- Fits: 2014-2020 Fiat 500L
- Position: Rear right
- Material: Aluminum caliper casting, steel piston
- Condition: Remanufactured
Pulling to one side under braking, brake fluid around the caliper or one pad wearing faster than its twin can point to a sticking or leaking caliper. A stuck slide or a weak brake hose can show up the same way, so during a brake service look over the slides, hose and pads before you replace the caliper.
Fits
This caliper fits the 2014-2020 Fiat 500L, which takes one caliper at the rear right. This listing is a single caliper; the rear left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 at this position
- Piston outside diameter: 38 mm (1.5 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet fitting: line, M10 - 1.0 thread
- Housing cast number: 38/10 A823 336B
- Bracket cast number: 9342A
Build and materials
- Caliper type: Floating
- Casting material: Aluminum
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, a bleeder screw cap, bracket mounting bolts and a mounting bolt are not included, so plan on new bolts rather than reusing the old ones.
Interchange / FMSI:
FMSI: D1722
Frequently Asked Questions
Is this rear right caliper the right one for the 2014-2020 Fiat 500L?
Yes, the Nugeon 99-06313A is the rear right caliper for the 2014-2020 Fiat 500L; the rear left is a separate part.
Does this Nugeon caliper come with the mounting bracket and hardware?
Yes, it includes the bracket, slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads and bracket mounting bolts are not included.
What type of disc brake caliper is the 99-06313A?
The Nugeon 99-06313A is a floating caliper with an aluminum casting and one steel piston 38 mm (1.5 in) across.
How can I tell if a rear brake caliper is sticking?
Signs can include pulling to one side when braking, fluid around the caliper, or one pad worn more than its twin. A shop can test it properly.
Which bleeder screw thread does this rear right caliper use?
The bleeder screw on the Nugeon 99-06313A is M10-1.0 and is included. The inlet fitting for the brake line is M10 - 1.0.
