TERREPOWER 99P01351B rear left brake caliper for the 2015-2025 Subaru Outback and other vehicles presses the brake pads against the rotor to slow the wheel. This is a remanufactured floating disc brake caliper for the rear left wheel.
- Floating caliper with a cast iron casting
- Single steel piston, 40 mm (1.57 in) in outside diameter
- E-coated finish in a natural color
- Banjo bolt inlet fitting with an M10 - 1.0 inlet thread
- M10-1.0 bleeder screw with a bleeder screw cap
Quick facts
- Part: TERREPOWER 99P01351B brake caliper
- Also called: disc brake caliper
- Fits: 2015-2025 Subaru Outback and other vehicles
- Position: Rear left
- Material: Cast iron
- Condition: Remanufactured
A pull to one side, a burning smell after a drive, or pads worn unevenly can mean a caliper is sticking. These signs alone do not prove the caliper is at fault; a swollen brake hose is another common cause. The rear left takes one caliper, one on each side of the axle. The rear right is a separate part ordered on its own, and both sides are normally replaced together.
Fits
It works as a Subaru Outback caliper for 2015-2025 and also fits the 2015-2024 Subaru Legacy and the 2016-2018 Subaru WRX.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston outside diameter: 40 mm (1.57 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet thread size: M10 - 1.0
Build and materials
- Caliper type: Floating
- Inlet fitting: Banjo bolt
- Casting material: Cast iron
- Piston material: Steel
- Finish: E-coated, natural
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rear left brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and cap, and crush washer. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included, so plan on new mounting bolts.
Interchange / FMSI:
FMSI: D1808
Frequently Asked Questions
Does this WRX brake caliper fit the 2016-2018 Subaru WRX?
Yes. TERREPOWER 99P01351B is a rear left caliper that fits the 2016-2018 Subaru WRX, and the rear right side is a separate part.
Is this a Subaru Outback brake caliper replacement for 2015-2025?
Yes. TERREPOWER 99P01351B fits the rear left position on the 2015-2025 Subaru Outback, and it takes one caliper per side.
Do the slides and dust boots come with this remanufactured caliper?
Yes. This caliper comes with the bracket, caliper slides, dust boots, pad hardware, bleeder screw and cap, and crush washer; pads, shims, wear sensors and bracket bolts are not included.
What size are the piston and inlet thread on this banjo bolt caliper?
This caliper has one steel piston, 40 mm (1.57 in) across, and an M10 - 1.0 inlet thread for the banjo bolt fitting.
What signs can a sticking rear left caliper show?
A pull to one side, a burning smell after driving, or brake fluid around the dust boot can point to a sticking or leaking caliper. Brake faults should be checked by a shop promptly.
