Nugeon Disc Brake Caliper P/N:99P02189A
TERREPOWER 99P01697A front left brake caliper for the 2006-2018 Toyota RAV4 and other vehicles squeezes the pads against the rotor to slow the wheel. This remanufactured caliper is also called a disc brake caliper.
A pull to one side under braking or fluid around the caliper can mean it is worn. Worn pads, a damaged rotor or a bad brake hose can show similar signs, so find the cause before buying. This listing is one front left caliper; the 2006-2018 Toyota RAV4 takes one on this side, the front right is ordered separately, and both are normally replaced together.
The 2006-2018 Toyota RAV4, 2016-2020 Toyota Mirai and 2017-2018 Toyota Corolla iM are among the vehicles this caliper fits, along with other models.
Fit and size
Build and materials
One brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Pads, anti-squeal shims, wear sensors, the bleeder screw cap and mounting bolts are not included, so plan on new bolts.
Interchange / FMSI:
FMSI: D1211
Product information is for general reference and may contain errors. See our Disclaimer.
Is this Toyota RAV4 brake caliper for the 2006-2018 model years, and which engines does it cover?
Yes. TERREPOWER 99P01697A fits the 2006-2018 Toyota RAV4 with the L4-2.4L (2006-2008), L4-2.5L (2009-2018) and V6-3.5L (2006-2012), on the front left. Other models: look your car up in the "Vehicles it fits" section.
Does this front left brake caliper come with its bracket?
Yes. The bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers come with this caliper. Pads, shims, wear sensors, the bleeder cap and mounting bolts do not, so plan on new bolts.
How big is the piston on this front left brake caliper?
TERREPOWER 99P01697A has one steel piston, 63.37 mm (2.5 in) in outside diameter, on a floating caliper with a banjo inlet.
How does a sticking front left caliper show up on the pads?
A caliper that does not release can keep the pad dragging on the rotor, which can show as faster wear on that side or a burning smell after driving. A shop can inspect the caliper, slides and rotor.
What size is the bleeder screw on this front left brake caliper?
The bleeder screw is M7-1.0 and comes with the caliper; the bleeder screw cap is not included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.