TERREPOWER 99P01731B rear left brake caliper for the 2011-2017 Toyota Camry and other vehicles clamps the brake pads against the rotor to slow the wheel. This is a remanufactured caliper, also called a disc brake caliper, for the rear left wheel.
- Floating caliper with a single steel piston
- Aluminum casting with an E-coated finish
- Banjo-style inlet fitting
- Bleeder screw with an M7-1.0 thread
Quick facts
- Part: TERREPOWER 99P01731B brake caliper
- Also called: disc brake caliper
- Fits: 2011-2017 Toyota Camry and other vehicles
- Position: Rear left
- Material: Aluminum caliper casting, steel piston
- Condition: Remanufactured
A pull to one side while braking, a burning smell near one wheel or brake fluid around the wheel can mean a caliper is sticking or leaking. Before you replace this caliper, rule out a worn pad, a damaged brake hose or a stuck slide pin, since each can cause a pull or drag too.
Fits
Among the vehicles it fits are the 2011-2017 Toyota Camry, the 2011-2018 Toyota Avalon and the 2013-2018 Lexus ES300h, and it works as a direct-fit brake caliper replacement for each of them. If your car is a different model, look up its year in the "Vehicles it fits" section. The rear axle takes one caliper on each side; this listing is the left one, the right is a separate part, and the other side is normally done at the same time.
Specifications
Fit and size
- Position: Rear left
- Piston diameter: 38.02 mm (1.5 in)
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M7-1.0
- Cast numbers: housing 38 L, bracket 10 L 3801
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Caliper casting material: Aluminum
- Piston material: Steel
- Finish: E-coated
- Country of origin: Mexico
In the box
One caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1212
Frequently Asked Questions
Will this 2011-2017 Toyota Camry caliper fit the rear left side?
Yes. TERREPOWER 99P01731B is made for the rear left position on the 2011-2017 Toyota Camry. The right side takes a separate caliper.
Is this the right brake caliper for the rear left of a 2011-2018 Toyota Avalon?
Yes. This TERREPOWER 99P01731B rear left caliper fits the 2011-2018 Toyota Avalon. The rear right side is a separate part.
Do the bracket and slides come with the 99P01731B caliper?
Yes. The caliper comes with its bracket, caliper slides, dust boots, hardware, bleeder screw and crush washers. Brake pads, shims and wear sensors are not included.
What inlet fitting does this rear left caliper use?
This caliper has a banjo inlet fitting with an M10-1.0 x 23.4 port thread. Its single steel piston measures 38.02 mm (1.5 in) across.
How can I tell if a rear left caliper is dragging?
A pull to one side, a burning smell near one wheel after driving, or brake fluid around the wheel can mean a caliper problem. A shop can inspect the brakes to confirm.
