TERREPOWER 99P03332B rear left brake caliper for the 2000-2005 Volkswagen Jetta and other vehicles presses the pads against the rotor to slow the wheel. This remanufactured caliper is sold individually.
- Floating design with a single steel piston
- Aluminum housing with an E-coated finish
- Bracket, caliper slides, pad hardware and dust boots included
- Banjo inlet fitting, with the bleeder screw and crush washer included
Quick facts
- Part: TERREPOWER 99P03332B brake caliper
- Also called: disc brake caliper
- Fits: the 2000-2005 Volkswagen Jetta and other vehicles
- Position: Rear left
- Material: Aluminum housing, steel piston
- Condition: Remanufactured
A sticking or leaking caliper can show up as the car pulling to one side, uneven pad wear or fluid at the wheel. Those signs alone don't prove the caliper is at fault, since a collapsed brake hose can make a brake drag too.
Fits
This rear left caliper fits the 2000-2005 Volkswagen Jetta and is also a brake caliper for the 2000-2006 Audi TT Quattro. The 2000-2005 Volkswagen Jetta takes one at the rear left; the rear right is its own part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston diameter: 41 mm (1.61 in)
- Number of pistons: 1
- Inlet fitting: Banjo, M12-1.0 x 20.9 mm port thread
- Bleeder screw thread: M10-1.0
- Housing cast number: 313/1
- Bracket cast number: 5612/4
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Housing material: Aluminum
- Piston material: Steel
- Finish: E-coated
- Caliper manufacturer: Lucas
- Country of origin: Mexico
In the box
One rear left brake caliper with its bracket, caliper slides, pad and caliper hardware, dust boots, bleeder screw and crush washer. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included, so plan on new bolts.
Interchange / FMSI:
FMSI: D340
Frequently Asked Questions
Is this a caliper for the 2000-2005 Volkswagen Jetta, left or right side?
TERREPOWER 99P03332B is the rear left caliper for the 2000-2005 Volkswagen Jetta. The rear right side takes a separate part.
Does the TERREPOWER 99P03332B come with brake pads or bracket bolts?
TERREPOWER 99P03332B includes the bracket, caliper slides, hardware, dust boots, bleeder screw and crush washer. Brake pads, wear sensors and the bracket mounting bolts are not included, so plan on new bolts.
What piston size does this disc brake caliper have?
This rear left caliper has one steel piston, 41 mm (1.61 in) in diameter, in a floating design with an aluminum housing.
How can I tell if a rear brake caliper is sticking?
Pulling to one side, a burning smell after a drive or one pad worn much thinner than the other can point to a sticking caliper. A shop can test it, and a dragging brake should be looked at promptly.
What thread sizes do the inlet and bleeder screw use on this rear caliper?
TERREPOWER 99P03332B has a banjo inlet with an M12-1.0 x 20.9 port thread and an M10-1.0 bleeder screw thread.
