PowerStop Disc Brake Pad Set P/N:Z47-1317
PowerStop 17-1317 rear brake pad for the 2010-2018 Mercedes-Benz Sprinter 2500 and other vehicles presses a ceramic friction surface against the rotor to slow the vehicle. This PowerStop brake pad belongs to the Z17 Evolution Plus line and comes with its own shims and hardware.
Squealing or grinding, a longer pedal, or lining worn thin can mean the rear pads are due. Before you replace them, rule out a sticking caliper or a worn rotor, since either can cause similar noise. PowerStop pads like this one have no wear sensor, so a visual check at a brake service is how you measure the lining.
The vehicles it fits include the 2010-2018 Mercedes-Benz Sprinter 2500, the 2010-2018 Mercedes-Benz Sprinter 3500 and the 2007-2018 Freightliner Sprinter 2500. If your vehicle is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
Rear brake pads are normally replaced on both wheels of the axle together. This listing is one disc brake pad set, and the vehicle takes one. It comes with multi-layer rubberized shims and stainless-steel hardware that makes the brake job easier to complete. Brake lubricant is not included.
Interchange / FMSI:
FMSI: D1317
Product information is for general reference and may contain errors. See our Disclaimer.
Are these 2010-2018 Mercedes-Benz Sprinter 2500 brake pads for the rear axle?
Yes, PowerStop 17-1317 is a rear pad set for the 2010-2018 Mercedes-Benz Sprinter 2500 and the 2010-2018 Mercedes-Benz Sprinter 3500; check the "Vehicles it fits" section for other vehicles.
Do PowerStop 17-1317 pads come with hardware and shims?
Yes, the PowerStop 17-1317 set includes stainless-steel hardware and multi-layer rubberized shims; brake lubricant is not included.
Are PowerStop Evolution Plus brake pads ceramic?
Yes. This rear set uses a ceramic friction material with a low-dust formula, and the pad face is chamfered and slotted.
How fast is the break-in on PowerStop Evolution brake pads?
The thermal scorched pad surface on PowerStop 17-1317 is designed for a fast break-in, and positive mold technology is meant to keep wear consistent.
What signs can mean these rear ceramic pads are worn out?
Squealing or grinding, a longer pedal, or lining worn thin can point to worn pads. With no wear sensor on this set, a visual check at a brake service shows how much lining is left.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.