PowerStop AR85198EVC front brake rotor for the 2019-2025 Ford Ranger and other vehicles gives the brake pads a smooth surface to clamp against. This disc brake rotor is a direct bolt-on replacement from PowerStop's Evolution Coated line, with no modifications necessary.
- PowerStop Evolution Coated rotors are fully coated with Genuine GEOMET 360 to protect against rust and corrosion
- Thin layer of GEOMET 360 coating that does not influence braking performance
- Strict tolerances for DTV and runout for smooth, quiet performance
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop AR85198EVC brake rotor
- Also called: disc brake rotor
- Fits: 2019-2025 Ford Ranger and other vehicles
- Position: Front
- Condition: New
A pulsating brake pedal, steering-wheel shake under braking, or deep grooves and rust ridges on the rotor face can mean the rotor is worn, though worn pads or other brake parts can cause similar signs. During a brake service, measure the rotor's thickness against its discard thickness and look for cracks before you replace it.
Fits
It fits the 2019-2025 Ford Ranger and the 2021-2025 Ford Bronco. This listing is one front rotor; the other rotor on that axle is normally replaced at the same time.
Specifications
Fit and size
- Position: Front
- Outside diameter: 311.00 mm (12.24 in)
- Bolt circle: 139.70 mm (5.50 in), 6 lug holes
- Nominal thickness: 34.00 mm (1.34 in)
- Discard thickness: 32.00 mm (1.26 in)
- Overall height: 66.40 mm (2.61 in)
Build and materials
- Type: Vented, full cast
- Surface: Smooth
- Coating: Genuine GEOMET 360, fully coated
- Balancing: 100% dynamic mill balanced
- ABS tone ring: not included
- Condition: New
- Country of origin: China
In the box
One front brake rotor, sold individually. A front axle takes two rotors, so the other side needs a second one.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Are these 2019-2025 Ford Ranger rotors a front or rear part?
They are front rotors. PowerStop AR85198EVC is a front brake rotor for the 2019-2025 Ford Ranger and is sold one per listing.
Can I use this as one of the Bronco brake rotors for a 2021-2025 Ford Bronco?
Yes. PowerStop AR85198EVC fits the 2021-2025 Ford Bronco as a front rotor, and a front axle takes two.
Is this PowerStop brake rotor coated and balanced?
Yes. This rotor is fully coated with Genuine GEOMET 360 and is 100% dynamic mill balanced, with strict tolerances held for DTV and runout.
How thin can this rotor wear before it needs replacing?
Nominal thickness is 34.00 mm (1.34 in) and discard thickness is 32.00 mm (1.26 in). A rotor measuring 32.00 mm or less needs replacing.
Do PowerStop front rotors like this one include the ABS tone ring?
No. PowerStop AR85198EVC does not include an ABS tone ring.
