Rear Shock Absorber for 2011-2021 Ram 1500 & More - Rancho Suspension RS994367

$165.99

Vehicles this part fits

    Part number: RS994367
    UPC: 039703017824
    Condition: New
    Weight: 8.20 LBS
    Item Package Quantity: 1
    $165.99
    Adding to cart… The item has been added

    Have questions?

    Rancho Suspension Shock Absorber P/N:RS994367
    Rancho Suspension Shock Absorber P/N:RS994367
    $165.99
    $165.99

    Rancho Suspension RS994367 rear shock absorber for the 2011-2021 Ram 1500 and other vehicles damps rear axle movement with a nine-position adjustment knob. It is intended for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road.

    • Rancho RS9000XL fourth-generation design with integrated bottom mounts for added strength
    • Damping and firmness adjust for both on-road and off-road driving
    • Nitrogen gas charge at 45 or 60 PSI to reduce damping fade and foaming
    • Tri-tube body up to 2.38 in. filled with all-weather fluid, for internal temperatures of -40 to 248°F
    • Polyurethane rebound bumper and bushings with a graphite-filled fluon-banded piston
    • Low-friction, self-lubricating seal that retains gas and oil

    Quick facts

    • Part: Rancho Suspension RS994367 shock absorber
    • Also called: suspension shock absorber
    • Fits: 2011-2021 Ram 1500 and other vehicles
    • Position: Rear
    • Material: Steel
    • Condition: New

    A worn shock absorber can show up as extra bounce after bumps, fluid on the body or a loose-feeling rear end. Worn rear springs, mounts or tires can be behind those signs too, so find the cause before buying.

    Fits

    It fits the 2011-2021 Ram 1500, the 2009-2010 Dodge Ram 1500 and the 2019-2024 Ram 1500 Classic. This listing is one rear shock absorber; the 2011-2021 Ram 1500 takes two, and the other one on the rear axle is normally replaced at the same time.

    Specifications

    Fit and size

    • Position: Rear
    • Quantity per vehicle: 2
    • Compressed length: 418.5 mm (16.48 in)
    • Extended length: 649.6 mm
    • Travel length: 231 mm (9.09 in)
    • Body diameter: 60.3 mm (2.37 in)
    • Bore size: 32 mm (1.26 in)
    • Rod diameter: 18 mm (0.71 in)
    • Dust shield diameter: 75.9 mm (2.99 in)
    • Upper and lower mounts: loop (eyelet) bushing and sleeve, 9/16 sleeve ID x 1.5/8 sleeve OAL

    Build and materials

    • Body and cylinder material: steel
    • Shaft: chromed
    • Finish: painted, dual component 2K paint
    • Gas charge: nitrogen, 45 or 60 PSI
    • Damping adjustment: manual, nine positions
    • Valving: progressive
    • Boot: included
    • Condition: new
    • Warranty: Rancho Limited Lifetime Warranty
    • Country of origin: Australia

    In the box

    One rear shock absorber with its protective boot. Springs are not included.

    Interchange: 772126F · 772726F · 52853456AB · 52853457AD · 52853460AE · 52853460AF · 52855791AC · 52855791AD · 68194016AA · 68194016AB · RS999367

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    772126F, 772726F, 52853456AB, 52853457AD, 52853460AE, 52853460AF, 52855791AC, 52855791AD, 68194016AA, 68194016AB, RS999367

    Frequently Asked Questions

    Are these 2011-2021 Ram 1500 shock absorbers also right for the 2019-2024 Ram 1500 Classic?

    Yes. Rancho Suspension RS994367 is a rear shock absorber for the 2019-2024 Ram 1500 Classic as well as the 2011-2021 Ram 1500.

    How many settings does the Rancho RS9000XL knob have?

    Nine. The nine-position knob on this shock absorber sets damping and firmness for on-road or off-road driving.

    What gas pressure does the Rancho RS994367 run?

    The RS994367 is charged with nitrogen gas at 45 or 60 PSI, which helps minimize air-to-oil mixing and reduces damping fade and foaming.

    Does this suspension shock absorber come with springs?

    No. This listing is one rear shock absorber with its protective boot, and springs are not included.

    Does the Rancho RS994367 replace part number 52853456AB?

    Yes. 52853456AB is one of the numbers this Rancho shock absorber replaces, along with the other numbers on the Interchange line.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review