Sachs Clutch Flywheel P/N:NFW1069
Sachs NFW9125 clutch flywheel for the 2001-2011 Ford Ranger 4-cylinder 2.3L ties the clutch to the engine crankshaft and gives the clutch disc a friction surface. It is matched to OE form, fit and function.
Shudder when pulling away, clutch slipping or a grinding starter can mean the flywheel face or ring gear is worn. A worn clutch disc is another common reason for slipping, so these signs alone do not show the flywheel is at fault.
This flywheel is a direct-fit replacement for the 2001-2011 Ford Ranger 4-cylinder 2.3L.
Fit and size
Build and materials
This listing is one clutch flywheel, and the 2001-2011 Ford Ranger 4-cylinder 2.3L takes one.
Interchange: 1L5Z6375BA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right clutch flywheel for the 2001-2011 Ford Ranger 4-cylinder 2.3L?
Yes. Sachs NFW9125 is listed for the 2001-2011 Ford Ranger 4-cylinder 2.3L, and that engine takes one flywheel.
Is the NFW9125 flywheel made of cast iron?
Yes. Sachs NFW9125 is a cast iron flywheel with a flat friction surface.
How many teeth does the ring gear on this flywheel have?
The ring gear has 116 teeth and a 295.2 mm outside diameter, which are the sizes to compare against your old flywheel.
Can the friction surface on this Sachs flywheel be replaced on its own?
No. The friction surface is not a replaceable part, so the flywheel is replaced as one piece.
Does the Sachs NFW9125 replace interchange number 1L5Z6375BA?
Yes. Interchange number 1L5Z6375BA is listed as one that Sachs NFW9125 replaces.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.