Help keep unmetered air out of the intake with the SKP Fuel Injection Plenum Gasket Set, part number SKMS19928, a direct-fit replacement gasket set for the upper plenum position on the listed applications. It fits many vehicles, among them the 2011-2019 Ford F-150 2.7L / 3.0L / 3.3L / 3.5L / 3.7L / 5.0L / 6.2L, the 2011-2017 Ford Mustang 2.3L / 3.7L / 5.0L / 5.2L / 5.4L / 5.8L and the 2011-2019 Ford Explorer 2.0L / 2.3L / 3.5L. See the "Vehicles it fits" section for the full list of Ford and Lincoln applications.
The upper intake plenum carries metered air toward the engine's intake runners. Its gaskets seal the plenum's mating surfaces so the engine draws only the air the sensors have measured, which helps the system hold the correct air-fuel ratio.
Signs this gasket set may need replacing include a vacuum leak, a hissing sound near the intake, a rough or unstable idle, or lean-condition trouble codes. These symptoms can have other causes, so diagnose the leak first; if a leaking upper plenum gasket is the cause, this set replaces it. Plenum gaskets are also commonly renewed whenever the upper plenum is removed for access to other engine components.
Interchange: MS19928 · MS97214 · 711477000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a fuel injection plenum gasket set do?
It seals the mating surfaces of the upper intake plenum so the engine draws only metered air, helping prevent vacuum leaks and a lean air-fuel ratio.
Does this fit the 2011-2019 Ford F-150 2.7L / 3.0L / 3.3L / 3.5L / 3.7L / 5.0L / 6.2L?
Yes, the 2011-2019 Ford F-150 2.7L / 3.0L / 3.3L / 3.5L / 3.7L / 5.0L / 6.2L is a listed application. The "Vehicles it fits" section shows the years listed for each engine.
Will it fit a 2011-2017 Ford Mustang 2.3L / 3.7L / 5.0L / 5.2L / 5.4L / 5.8L or a 2011-2019 Ford Explorer 2.0L / 2.3L / 3.5L?
Yes, both are listed applications. The "Vehicles it fits" section shows the full list of Ford and Lincoln vehicles this set fits.
What signs suggest the plenum gasket may need replacing?
A vacuum leak, hissing near the intake, rough idle or lean-condition codes can come from a leaking plenum gasket, but other faults cause them too, so diagnose the leak before replacing.
How many sets does my vehicle need, and where is it made?
The listed applications use one set, designed for the upper plenum position. The country of origin is China.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
