Spicer Drive Shaft Assembly P/N:10113216
Dana/Spicer 10020345 front drive shaft for the 2018-2022 Jeep Wrangler and other vehicles sends drive torque to the front axle.
A clunk when you get on or off the throttle, or a vibration that builds with speed, can mean a drive shaft is worn. Before you replace it, rule out out-of-balance tires and other driveline wear, which can shake the vehicle too, and let a shop inspect the driveline if you are unsure.
It fits the 2018-2022 Jeep Wrangler and works as a drive shaft for the 2020-2022 Jeep Gladiator, where it is made for lifts of 0 to 6 inches. This listing is one shaft; the 2018-2022 Jeep Wrangler takes one, as does the 2020-2022 Jeep Gladiator.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
Is the Dana/Spicer 10020345 a 2018-2022 Jeep Wrangler drive shaft for the front axle?
Yes. Dana/Spicer 10020345 is a front drive shaft for the 2018-2022 Jeep Wrangler, which takes one.
Does this front drive shaft fit a lifted 2020-2022 Jeep Gladiator?
Yes. Dana/Spicer 10020345 fits the 2020-2022 Jeep Gladiator and is made for lifts of 0 to 6 inches.
How much thicker is the tubing on the Dana/Spicer 10020345 drive shaft?
The tubing is 50% thicker for added strength. The small-diameter design is meant to avoid exhaust clearance issues on lifted vehicles.
Could a vibration at speed come from a worn front drive shaft assembly?
Yes, it can, though tires and other driveline parts can also cause it. A shop can inspect the driveline to find the source.
Where is this Dana/Spicer drive shaft made, and what series is it?
Dana/Spicer 10020345 is Series 1310, and its country of origin is the United States.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.