Standard Ignition Automatic Transmission Control Solenoid P/N:TCS194
Standard Motor Products
Get positive, on-command valve actuation from your automatic transmission's control solenoid with the Standard Ignition Automatic Transmission Control Solenoid TCS101. It is a direct-fit replacement for the 2000-2011 Ford Focus and the 2010-2013 Ford Transit Connect. Its resistance and inductance are matched to the OE part for proper fit, form and function.
A transmission control solenoid is an electrically operated valve. When the vehicle's control module energizes it, the pintle moves to block or vent fluid pressure in the transmission circuit it controls. The TCS101 is built around four features:
Signs this part may need replacing: harsh, delayed or erratic shifts, trouble shifting into certain gears, and a check engine light with transmission-related trouble codes. Other faults can cause the same symptoms, so diagnose the cause before replacing the solenoid. If a failed control solenoid is the cause, the TCS101 replaces it.
Fitment: 2000-2011 Ford Focus; 2010-2013 Ford Transit Connect. See the "Vehicles it fits" section for engine and application details.
Interchange: TCS25 · TCS95 · TCS645 · XS4Z7H148AA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a transmission control solenoid do?
It is an electrically operated valve. When the control module energizes it, the pintle moves to block or vent fluid pressure in the transmission circuit it controls.
Which vehicles does the Standard Ignition TCS101 fit?
It is listed for the 2000-2011 Ford Focus and the 2010-2013 Ford Transit Connect. See the "Vehicles it fits" section for engine and application details.
What are signs this solenoid may need replacing?
Possible signs include harsh, delayed or erratic shifts and a check engine light with transmission-related codes. Other faults cause similar symptoms, so diagnose the cause before replacing the solenoid.
What is the filter screen for?
The TCS101 has a stainless steel filter screen. It is intended to prevent contamination of the solenoid's valve components.
Which part numbers does the TCS101 interchange with?
It interchanges with TCS25, TCS95, TCS645 and XS4Z7H148AA.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.