Standard Ignition Automatic Transmission Control Solenoid P/N:TCS30
Standard Motor Products
Standard Ignition TCS208 transmission control solenoid for the 2011-2017 Jeep Wrangler and other vehicles blocks or vents fluid pressure inside the transmission. It is also called an automatic transmission control solenoid and works as part of the transmission's hydraulic control.
Harsh or delayed shifts, a transmission that hangs in one gear or a transmission warning light can have several causes, a failed solenoid among them. Resistance and inductance are matched to OE, so if the solenoid is the cause, this one replaces it. To find the cause first, look over the connector and wire harness with the engine off for damage or corrosion, and leave electrical testing to a shop.
The solenoid is listed for a wide range of Chrysler, Dodge, Freightliner, Jeep and Mercedes-Benz models, including the 2011-2017 Jeep Wrangler, the 2006-2019 Dodge Charger and the 2005-2013 Jeep Grand Cherokee. If your car is not one of those, search its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One transmission control solenoid. The 2011-2017 Jeep Wrangler takes one, and this listing holds one. Gaskets, hardware, a mounting bracket and a wiring harness are not included, so plan on new gaskets and hardware where the job calls for them, since the old ones may not be reusable.
Interchange: TCS131 · 5080269AA · 5138838AA · 52108312AA · TCS751 · 1402770098 · 1402770398 · 2032700089
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Standard Ignition TCS208 work as a transmission control solenoid for the 2005-2013 Jeep Grand Cherokee?
Yes, Standard Ignition TCS208 is listed for the 2005-2013 Jeep Grand Cherokee, which takes one solenoid. For another car, look up its year and model in the "Vehicles it fits" section on this page.
Does the TCS208 come with a wiring harness or gaskets?
No. Standard Ignition TCS208 is one solenoid; gaskets, hardware, a mounting bracket and a wiring harness are not included.
What kind of connector does this transmission control solenoid have?
This solenoid has one rectangular female connector with two male blade terminals and a push-on attachment.
How can I tell if a transmission control solenoid is going bad?
Harsh or delayed shifts, or a transmission that stays in one gear, can have several causes, a solenoid among them. A shop can test the solenoid's electrical values and the transmission itself.
Does TCS208 replace part number 5080269AA?
Yes. 5080269AA is one of the cross-reference numbers on the Interchange line for Standard Ignition TCS208, along with several others.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.