Standard Ignition Automatic Transmission Control Solenoid P/N:TCS101
Standard Motor Products
Standard Ignition TCS281 transmission control solenoid for the 2007-2019 Toyota Tundra and other vehicles blocks or vents fluid pressure on command inside the automatic transmission.
Harsh or delayed shifts, or a transmission that stays in one gear, can mean the solenoid is worn. Low or dirty transmission fluid, a damaged wire harness or other shift components can be behind those signs too, so find the cause before you buy a solenoid.
The same solenoid fits the 2008-2019 Toyota Sequoia and the 2013-2019 Lexus GS350, and each vehicle takes one. Resistance and inductance are matched to OE, and every unit gets 100% end-of-line testing to meet or exceed OE performance. If your Toyota or Lexus is a different year or model, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One solenoid, with gaskets and a mounting bracket included. A wiring harness and hardware are not included; plan on new fasteners, because the old ones may not be reusable.
Interchange: TCS204 · TCS824 · 3524050030
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Standard Ignition TCS281 fit a 2008-2019 Toyota Sequoia?
Yes. Standard Ignition TCS281 fits the 2008-2019 Toyota Sequoia, and each vehicle takes one. Other Toyota and Lexus years and models are in the "Vehicles it fits" section.
Does this automatic transmission control solenoid come with a wiring harness?
No. The Standard Ignition TCS281 comes as one solenoid with gaskets and a mounting bracket. The wiring harness and hardware are not included.
What connector does the TCS281 solenoid have?
This solenoid has one rectangular female connector with one male blade terminal. It attaches with a push-on fit to the engine wire harness.
What can a failing transmission control solenoid feel like?
Harsh shifts, delayed shifts or a gear that will not engage can mean the solenoid is sticking. A shop can test it, since the pintle must move freely to block or vent fluid pressure.
Does the TCS281 replace part number 3524050030?
Yes. Standard Ignition TCS281 is listed as a replacement for 3524050030, and also for TCS204 and TCS824.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.