Standard Ignition Engine Coolant Temperature Sender P/N:TS-17
Standard Motor Products
The Standard Ignition Engine Coolant Temperature Sender TS-43 is a temperature sender with light. It is designed to make electrical contact at its specified temperature set point. It fits many vehicles, among them the 1978-1981 Chevrolet Malibu, 1973-1980 Chevrolet Camaro and 1966-1983 Buick LeSabre. See the "Vehicles it fits" section for the full list of applications and engine details.
Standard Ignition is a global manufacturer of original equipment ignition products. It keeps full quality control over the manufacturing process, from individual components through to the finished sender.
Signs a temperature sender may need replacing include a warning light that stays on with a cold engine, a light that never comes on, or coolant seeping at the sender. Wiring faults and cooling-system problems can cause similar symptoms, so diagnose the cause before replacing the sender. If the original sender has failed, the TS-43 replaces it.
Interchange: WT346 · 8344 · TU46 · TS6613 · 25036310 · 25036505 · 25036506 · 25036509 · 25036510 · 25036512 · 6488708 · 6489179 · 6489340 · 6490694 · 6490970 · TS6613SB · TS43T
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the Standard Ignition TS-43 do?
It is a temperature sender with light. This thermal switch is factory-calibrated to make electrical contact at its specified temperature set point, which provides the signal used by the temperature warning light.
Is this the right Malibu switch for a 1978-1981 Chevrolet Malibu?
Yes. It fits many vehicles, including the 1978-1981 Chevrolet Malibu, the 1966-1983 Buick LeSabre and the 1973-1980 Chevrolet Camaro. See the "Vehicles it fits" section for the full list and engine details.
Is this sender for a warning light or a gauge?
Standard describes the TS-43 as a temperature sender with light. It is intended for systems that use a temperature warning light.
What are signs the temperature sender may need replacing?
Possible signs include a warning light that stays on with a cold engine, a light that never comes on, or a leak at the sender. Check the wiring and cooling system first, because they can cause the same symptoms.
How is each TS-43 checked for accuracy?
Every unit is calibrated and tested to confirm that the switch actuates at its specified temperature.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.