Standard Ignition Engine Coolant Temperature Sender P/N:TS-65
Standard Motor Products
Put a freshly calibrated coolant temperature signal back behind your dash warning light with the Standard Ignition Engine Coolant Temperature Sender TS-145. This light-type sender is a direct-fit replacement for many vehicles, among them the 1982-1986 Chevrolet S10, 1985-1987 Chevrolet Cavalier and 1982-1986 Chevrolet Celebrity. It also covers a wide range of other Buick, Chevrolet, GMC, Oldsmobile and Pontiac models; see the "Vehicles it fits" section for the full list and engine details.
Standard Ignition lists this part as a temperature sender with light. It monitors engine coolant temperature and completes the circuit to the temperature warning light when coolant reaches the sender's specified set point.
Signs this part may need replacing: The temperature warning light may stay on with a cold engine, fail to light when the engine is running hot, or flicker. Diagnose the cooling system and wiring first. If the sender is the cause, the TS-145 replaces it.
Interchange: 8933001542 · WT760 · TU81 · TS6050 · 25036373
This part cross-references / interchanges with the following part numbers:
What does the TS-145 temperature sender do?
It monitors engine coolant temperature and completes the circuit to the dash temperature warning light when coolant reaches the sender's specified set point.
Is the TS-145 made for a warning light?
Yes. Standard Ignition lists the TS-145 as a temperature sender with light, so it is intended for the listed vehicles that use a temperature warning light.
Is the TS-145 an ignition switch for the 1982-1986 Chevrolet S10?
No. It is a coolant temperature sender with light. It fits many vehicles, among them the 1982-1986 Chevrolet S10, 1985-1987 Chevrolet Cavalier and 1982-1986 Chevrolet Celebrity; see the "Vehicles it fits" section.
What are signs the coolant temperature sender may be failing?
A warning light that stays on with a cold engine, never lights when the engine runs hot, or flickers can signal a sender problem. Check the cooling system and wiring first.
How is the TS-145 tested before it ships?
Standard Ignition calibrates and tests every unit to confirm that the switch actuates at its specified temperature. Its thermal switches are factory-calibrated to make contact at the specified set point.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.