Standard Ignition Fuel Feed Line P/N:GDL516
Standard Motor Products
Standard Ignition GDL105 fuel feed line for the 2009-2017 Chevrolet Traverse V6 3.6L and other vehicles carries fuel between two screw-on fittings.
Fuel smell, wetness around the fittings or a cracked line can mean a fuel leak, and hard starting can have several fuel-system causes. Before you replace the line, rule out a loose fitting or a fault elsewhere in the fuel system; a shop can pressure-test it. A V6 3.6L takes a single feed line.
This direct-fit OE replacement is listed for a wide range of Buick, Chevrolet, GMC, Cadillac and Saturn models, led by the 2009-2017 GMC Acadia V6 3.6L and the 2009-2017 Buick Enclave V6 3.6L. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One fuel feed line with its fittings. Mounting hardware is not included, so plan on new hardware rather than reusing the old.
Interchange: 2-34409 · 800-6510
LGD15 · 12591197
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition GDL105 fuel feed line fit a 2009-2017 GMC Acadia V6 3.6L?
Yes. Standard Ignition GDL105 fits the 2009-2017 GMC Acadia V6 3.6L and the 2009-2017 Chevrolet Traverse V6 3.6L; other cars are in the "Vehicles it fits" section.
Does the GDL105 fuel feed line come with its fittings?
Yes. The line comes with its fittings, but mounting hardware is not included, so plan on new hardware.
What thread size do the ends of the Standard Ignition GDL105 use?
Both ends are screw-on fittings with a 14MMX1.50 thread, and the Standard Ignition GDL105 line has a 3.52 mm inner diameter.
How can I check the GDL105 fuel feed line area for leaks?
Look, with the engine off and cool, for fuel wetness, cracks or a fuel smell near this fuel feed line and its fittings. Fuel leaks are a hazard, so have the car inspected promptly; a shop can pressure-test the system.
What material and length is the Standard Ignition GDL105 fuel feed line?
The Standard Ignition GDL105 is a metal, molded line that measures 54.77 mm (2.156 in) long.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.