Standard Ignition GDL516 fuel feed line for the 2015-2017 Honda Civic 4-cylinder 1.5L carries fuel between two ports in the engine's fuel system. It is used in a gasoline direct-injection setup.
- Metal, molded construction made to withstand harsh engine conditions
- Screw-on ends with 14MMX1.50 threads on both sides
- Fittings included with the line
- Tested and validated for proper performance
Quick facts
- Part: Standard Ignition GDL516 fuel feed line
- Fits: the 2015-2017 Honda Civic 4-cylinder 1.5L
- Material: Metal
- Condition: New
A fuel feed line that is cracked or leaking can show up as a fuel smell, wet residue around the fittings or hard starting. Before you replace the line, rule out a fuel pump, injector or fitting problem, since those can produce similar signs; a shop can test the fuel system safely.
Fits
This fuel feed line is an OE replacement for the 2015-2017 Honda Civic 4-cylinder 1.5L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Length: 4.375 in (111.125 mm)
- Inner diameter: 3.64 mm (0.143 in)
- Port quantity: 2
- Thread size, both ends: 14MMX1.50
Build and materials
- Material: Metal
- Construction: Molded
- Fitting type, both ends: Screw on
- System type: Direct
- Fuel injection type: GDI
- Fuel type: Gas
- Condition: New
- Country of origin: United States
In the box
One fuel feed line with its fittings and an instruction sheet. This listing holds one line, and the 2015-2017 Honda Civic 4-cylinder 1.5L takes one. Hardware is not included, so plan on new fasteners, as the old ones may not be reusable.
Installation notes
- The included instruction sheet covers the installation steps.
Interchange: 2-34461 · 800-6562
LGD506 · 1601259B305 · 1601259B315
This part cross-references / interchanges with the following part numbers:
LGD506, 2-34461, 1601259B305, 1601259B315, 800-6562, GDL516
Frequently Asked Questions
Does the Standard Ignition GDL516 fuel feed line fit the 2015-2017 Honda Civic 4-cylinder 1.5L?
Yes. Standard Ignition GDL516 is listed for the 2015-2017 Honda Civic 4-cylinder 1.5L and is an OE replacement for that engine.
Does this fuel feed line come with its fittings?
Yes, the fittings are included, along with an instruction sheet. Hardware is not included.
What thread size and length does the GDL516 fuel feed line have?
Standard Ignition GDL516 has screw-on ends with 14MMX1.50 threads on both sides. The line is 4.375 in (111.125 mm) long with a 3.64 mm inner diameter.
Could a fuel smell near the engine come from a damaged fuel feed line?
Yes, a cracked or leaking line can leave a fuel smell or wet residue around the fittings. Because fuel is involved, have a shop inspect it promptly instead of driving on it.
Does the GDL516 replace the 1601259B305 number?
Yes. 1601259B305 is one of the numbers this Standard Ignition GDL516 fuel feed line replaces, along with 1601259B315 and LGD506.
