Standard Ignition Fuel Injection Throttle Body P/N:S20114
Standard Motor Products
Standard Ignition S20037 fuel injection throttle body for the 2006-2008 Chevrolet Aveo 4-cylinder 1.6L and other vehicles controls the air entering the engine. It meets or exceeds OE performance and is designed and tested for domestic vehicles.
A wandering idle, slow response to the pedal or a throttle warning light can come from a worn or dirty throttle body, though a loose connector or a vacuum leak can look similar. Before replacing it, look with the engine off and cool for heavy carbon around the throttle plate and for a damaged connector. A shop can test the rest.
This throttle body also fits the 2007-2008 Chevrolet AVEO5 4-cylinder 1.6L and the 2006-2008 Pontiac Wave 4-cylinder 1.6L, with one needed per car. If your car isn't one of these, find its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One throttle body and one seal. Mounting hardware, fuel injectors, a throttle body spacer and an idle air control motor are not included, and since the old fasteners may not be reusable, plan on new ones.
Interchange: TB1031D · 25181982 · 25183237 · 96417720 · 96417740 · ETB107
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition S20037 throttle body right for a 2007-2008 Chevrolet AVEO5 4-cylinder 1.6L?
Yes. Standard Ignition S20037 fits the 2007-2008 Chevrolet AVEO5 4-cylinder 1.6L, and that car needs one. For another car, look up its year and engine in the "Vehicles it fits" section.
Does this throttle body come with a throttle position sensor and a seal?
Yes. The unit includes the throttle position sensor and comes with a seal. Mounting hardware, fuel injectors, a spacer and an idle air control motor are not included.
How many terminals does the S20037 throttle body connector have?
Standard Ignition S20037 has one female connector with six male blade terminals.
Does the Standard Ignition S20037 throttle body need a relearn after installation?
Yes. Standard Ignition S20037 requires a relearn once it is installed. It is calibrated to match OE output voltages, which helps that process go smoothly.
Why does this throttle body use sealed ball bearings?
The sealed ball bearings limit airflow leakage and help reduce mass air-flow reading errors. The gear train is also built to hold up under harsh operating conditions.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.