Standard Ignition S20192 fuel injection throttle body for the 2013-2016 Ford Escape 4-cylinder 1.6L and other vehicles controls how much air enters the engine. Each unit is assembled and calibrated to match OE output voltages.
- Gear train components built for durability under harsh operating conditions
- Silicone seal with temperature resistance
- Validated with 200+ hours of vibration testing, 1000+ hours of extreme heat and cold operational testing and on-vehicle testing
- Sealed ball bearings that limit airflow leakage and reduce mass air-flow reading errors
Quick facts
- Part: Standard Ignition S20192 fuel injection throttle body
- Fits: 2013-2016 Ford Escape 4-cylinder 1.6L and other vehicles
- Condition: New
A rough idle, stalling or slow throttle response can mean this throttle body is worn, though a dirty mass air flow sensor or an intake vacuum leak can be behind them too, so pin down which one is at fault before you buy.
Fits
The 2013-2016 Ford Escape 4-cylinder 1.6L, the 2013-2014 Ford Fusion 4-cylinder 1.6L and the 2011-2019 Ford Fiesta 4-cylinder 1.6L are covered, along with more vehicles. A 2013-2016 Ford Escape 4-cylinder 1.6L takes one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Connector: 1, female
- Terminals: 6, male blade
Build and materials
- Throttle position sensor: included
- Condition: New
- Country of origin: United States
In the box
One fuel injection throttle body, its seal and mounting hardware. Fuel injectors and a throttle body spacer are not included.
Installation notes
- A relearn is required after installation.
Interchange: TB1173D · 7S7Z9E926A · BE8Z9E926B · BE8Z9E926C · ETB178
This part cross-references / interchanges with the following part numbers:
S20192, TB1173D, 7S7Z9E926A, BE8Z9E926B, BE8Z9E926C, ETB178
Frequently Asked Questions
Does the Standard Ignition S20192 throttle body fit the 2013-2016 Ford Escape 4-cylinder 1.6L?
Yes. Standard Ignition S20192 fits the 2013-2016 Ford Escape 4-cylinder 1.6L, and one throttle body is needed for that vehicle.
Does the S20192 throttle body come with a throttle position sensor and a seal?
Yes. Standard Ignition S20192 includes the throttle position sensor, a seal and mounting hardware. Fuel injectors and a throttle body spacer are not included.
How many terminals are in the connector on this throttle body?
The connector has six blade terminals, and there is one connector on the throttle body.
Does the Standard Ignition S20192 need a relearn after it is installed?
Yes. A relearn is required after installation, and each unit is calibrated to match OE output voltages for a smooth relearning process.
Does this Standard Ignition throttle body replace 7S7Z9E926A?
Yes. 7S7Z9E926A is one of the numbers Standard Ignition S20192 replaces, along with BE8Z9E926B, BE8Z9E926C, TB1173D and ETB178.
