Standard Ignition Heated Seat Module Connector,Power Seat Control Module Connector P/N:S2996
Replace a damaged heated seat wiring connection with the Standard Ignition Heated Seat Element Connector S2419. This multi-function connector links the seat's heating element to the vehicle's electrical harness. It is built for the listed Ford and Lincoln applications, including the 1999-2004 Ford Explorer, 2001-2004 Ford F-150, 2001-2010 Ford F-250 Super Duty and 2009-2016 Lincoln MKS.
A heated seat element connector carries current between the vehicle wiring and the heating element in the seat. Signs it may need replacing include a heated seat that works only intermittently or not at all, and a connector that is corroded, cracked or heat-damaged. The same symptoms can also come from the element, switch or wiring, so diagnose the cause before replacing the connector.
Fitment: 1999-2004 Ford Explorer; 2000-2005 Ford Excursion; 2000-2002 Lincoln LS; 2001-2003 Ford Explorer Sport; 2001-2004 Ford F-150; 2001-2010 Ford F-250 Super Duty; 2001-2010 Ford F-350 Super Duty; 2001-2010 Ford F-450 Super Duty; 2001-2010 Ford F-550 Super Duty; 2001-2003 Ford Windstar; 2002-2003 Lincoln Blackwood; 2008 Lincoln Town Car; 2009-2011 Ford Flex; 2009-2016 Lincoln MKS; 2010-2011 Lincoln MKT. See the Buyer's Guide tab for engine-level details.
Interchange: PT2404 · CONA322 · EC2320 · 3U2Z14S411UVA · 3U2Z14S411UVB · WPT1010 · WPT548
This part cross-references / interchanges with the following part numbers:
What does the Standard Ignition S2419 connector do?
It is a multi-function connector that links the heated seat element's wiring to the vehicle's electrical harness so current can reach the heating element.
Which vehicles does the S2419 fit?
It is listed for Ford and Lincoln models, including the 1999-2004 Ford Explorer, 2001-2010 Ford F-250 Super Duty and 2009-2016 Lincoln MKS. See the Buyer's Guide tab for the full list.
What are signs a heated seat element connector may need replacing?
Watch for a heated seat that works intermittently or not at all, or a connector that is corroded or heat-damaged. Check the element, switch and wiring as well before replacing.
Does it come with wire connectors or lead wires?
The connector arrives factory-assembled. Standard Ignition includes wire connectors and extended lead wires where applicable to the application.
Which part numbers does the S2419 interchange with?
It interchanges with PT2404, CONA322, EC2320, 3U2Z14S411UVA, 3U2Z14S411UVB, WPT1010 and WPT548.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.