Standard Ignition HS-360 HVAC blower control switch for the 2004-2011 Toyota Sienna sets the blower motor speed for the heater and A/C. Known as an A/C and heater blower motor switch, it is the control you use to pick the fan setting.
- Five switch positions with a toggle actuation style
- Rectangular connector with five blade and bullet terminals
- Plastic housing, with materials made to withstand extreme conditions
- 12-volt rating for the blower motor function
- Tested extensively for reliability, with quality control through the manufacturing process
Quick facts
- Part: Standard Ignition HS-360 HVAC blower control switch
- Fits: 2004-2011 Toyota Sienna
- Material: Plastic
- Condition: New
A blower that runs on only some settings, or not at all, and a switch that feels loose can mean the switch is worn. Before you replace it, rule out the blower motor, its fuse and the wiring, since a fault in any of them can also leave the fan dead or stuck on one speed.
Fits
This switch is a direct-fit OE replacement for the 2004-2011 Toyota Sienna, which takes one, and it is made for easy installation.
Specifications
Fit and size
- Quantity per vehicle: 1
- Switch positions: 5
- Width: 40.64 mm (1.6 in)
- Connector: 1 rectangular, female
- Terminals: 5, blade and bullet
- Attachment method: plug in
- Voltage: 12 V
Build and materials
- Housing material: plastic
- Switch actuation: toggle
- Condition: new
- Country of origin: Japan
In the box
One blower control switch. The wiring harness, mounting bracket and hardware are not included.
Interchange: BL194 · SW4478 · HC257 · 8473208070
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
BL194, SW4478, HC257, HS-360, 8473208070
Frequently Asked Questions
Does the Standard Ignition HS-360 fit the 2004-2011 Toyota Sienna?
Yes. The Standard Ignition HS-360 blower control switch fits the 2004-2011 Toyota Sienna, which takes one.
Does this blower control switch come with a wiring harness or mounting bracket?
No. This listing is the switch alone. The wiring harness, mounting bracket and hardware are not included.
How many speed positions does this HVAC blower control switch have?
This switch has five positions with a toggle actuation style, and it is rated at 12 volts.
Why does my blower work on only some settings, and could the switch be the reason?
A worn switch can leave the blower working on only some of its five positions, and the control may feel loose. A shop can test the circuit to find the cause.
What kind of connector does the HS-360 blower switch have?
The Standard Ignition HS-360 has one rectangular female connector with five blade and bullet terminals, and it attaches by plugging in.
