Standard Ignition WP-240 rear HVAC blower control switch for the 2000-2003 Oldsmobile Silhouette and other vehicles selects the blower motor speed for the heater and A/C.
- Four switch positions with a toggle actuation
- Three rectangular connectors with 8, 8 and 7 blade terminals
- Plastic housing for a 12-volt circuit
- Bolt-on attachment
- Extensive testing for reliability
Quick facts
- Part: Standard Ignition WP-240 HVAC blower control switch
- Fits: 2000-2003 Oldsmobile Silhouette and other vehicles
- Position: Rear
- Material: Plastic
- Condition: New
A rear blower that runs on only some settings, or not at all, can have several causes, and the switch is one of them. Before you replace the switch, rule out a blown fuse, a failed blower motor and damaged wiring or connectors. One switch goes in the rear position.
Fits
This switch is a direct-fit OE replacement for the 2000-2003 Oldsmobile Silhouette and the 2000-2003 Pontiac Montana.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1
- Switch positions: 4
- Connectors: 3, rectangular
- Terminals: 8, 8 and 7, blade type
- Voltage: 12 volts
- Overall width: 203.2 mm (8 in)
Build and materials
- Housing material: Plastic
- Switch actuation: Toggle
- Attachment method: Bolt on
- Condition: New
- Country of origin: United States
In the box
One blower control switch. The wiring harness, hardware and mounting bracket are not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: S3901 · SW2133 · SW2139 · WS6478 · 10243752 · 10252248 · 10409287 · 10409301
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
S3901, SW2133, SW2139, WS6478, 10243752, 10252248, 10409287, 10409301
Frequently Asked Questions
Does the Standard Ignition WP-240 fit the 2000-2003 Pontiac Montana?
Yes. The Standard Ignition WP-240 rear HVAC blower control switch fits the 2000-2003 Pontiac Montana and the 2000-2003 Oldsmobile Silhouette.
Does the WP-240 blower switch come with a wiring harness?
No. The Standard Ignition WP-240 is one switch only. The wiring harness, hardware and mounting bracket are not included.
How many positions does this rear blower control switch have?
This switch has four positions and a toggle actuation. It is made for a 12-volt circuit.
What connectors does this blower control switch use?
It has three rectangular connectors with blade terminals, carrying 8, 8 and 7 terminals. The wiring harness is not included.
How can I tell if a rear blower control switch is failing?
A rear blower that works on only some settings, or not at all, can mean a bad switch, though a fuse, motor or wiring fault can look the same. A shop can test it.
