Standard Ignition Parking Aid Sensor P/N:PPS98
Standard Motor Products
Standard Ignition PPS9 rear parking aid sensor for the 1996-2003 Mercedes-Benz E320 and other vehicles senses objects behind the car for the parking aid system. It matches the OE design 1 to 1 for direct fit and was tested to OE specifications.
Beeps with nothing behind the car, no beeps near an obstacle or a parking aid warning on the dash can mean a sensor has failed. Before replacing one, look over the sensor face and its connector with the engine off for dirt, cracks or damage, because a dirty face or a loose plug can act the same way.
This sensor also fits the 1998-2002 Mercedes-Benz E430 and the 1998-2002 Mercedes-Benz E55 AMG. If your car is a different Mercedes-Benz, find its year and model in the "Vehicles it fits" section. The number of sensors a car takes varies by model and year.
Fit and size
Build and materials
One parking aid sensor.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Standard Ignition PPS9 parking aid sensor fit the 1998-2002 Mercedes-Benz E430?
Yes. Standard Ignition PPS9 is a rear parking aid sensor listed for the 1998-2002 Mercedes-Benz E430.
What connector does this rear parking aid sensor use?
It has one oval female connector with four male pin terminals.
Does the PPS9 come as a single sensor?
Yes. Standard Ignition PPS9 is one rear parking aid sensor, and the contents are the sensor only.
How can I tell a rear parking aid sensor is going bad?
A parking aid that cuts in and out, or sounds a steady tone with the path clear, can mean a sensor fault.
Where is the Standard Ignition PPS9 parking aid sensor made?
The country of origin for the PPS9 is China.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.