If a failed actuator is keeping your truck's parking brake from applying or releasing, the Standard Ignition Parking Brake Actuator PBA002 is built to replace it. This rear-position unit fits the 2015-2018 Ford F-150. It is designed as a direct-fit OE replacement that matches the original part's fit, form, and function for a straightforward installation. See the Buyer's Guide tab for engine-specific fitment details.
The parking brake actuator applies and releases the parking brake at the rear. Signs it may need replacing include a parking brake that won't apply or won't release, or a parking brake warning on the dash. Diagnose the cause before replacing any parts, because wiring faults and other brake components can produce the same symptoms.
Interchange: EPB002 · PBC20002 · EPA002 · FL3Z2B712A · JL3Z2B712A · RBA002
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Standard Ignition PBA002 fit?
It is listed for the rear position on the 2015-2018 Ford F-150. See the Buyer's Guide tab for engine-specific details.
Does this parking brake actuator need programming after installation?
No. Standard Ignition describes the PBA002 as plug and play, with no additional programming required.
Is hardware included with the PBA002?
Yes. New hardware and a seal are included with the actuator.
What part numbers does the PBA002 interchange with?
It interchanges with EPB002, PBC20002, EPA002, FL3Z2B712A, JL3Z2B712A, and RBA002.
What are signs a parking brake actuator may need replacing?
A parking brake that won't apply or release, or a parking brake warning, can indicate a failed actuator. Diagnose the cause first, since wiring and other brake parts can cause similar symptoms.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
