Standard Ignition SS-345 starter solenoid for the 1986-1989 Mercedes-Benz 560SL V8 5.6L and other vehicles closes the circuit that sends battery current to the starter motor.
- Polyester-insulated magnet wire, cadmium-plated copper discs and solid contact bolts reduce voltage drop
- Heavy-duty copper contacts reduce the effect of arcing and extend solenoid life
- Pure copper windings create a stronger magnetic field
- Pure copper battery terminal studs reduce resistance to permit higher current flow, even in the hottest environments
Quick facts
- Part: Standard Ignition SS-345 starter solenoid
- Fits: 1986-1989 Mercedes-Benz 560SL V8 5.6L and other vehicles
- Condition: New
A single click with no cranking, a slow or intermittent start, or a starter that does not respond to the key can mean the solenoid contacts are wearing out. Those signs alone do not prove the solenoid is at fault; a discharged battery or a corroded cable is just as common a cause.
Fits
The 1986-1989 Mercedes-Benz 560SL V8 5.6L, the 1984-1985 Mercedes-Benz 380SE V8 3.8L and the 1981-1985 Mercedes-Benz 380SL V8 3.8L are among the vehicles this starter solenoid fits, and it fits more. The 1986-1989 Mercedes-Benz 560SL V8 5.6L takes one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V
- Length: 2.04 in (51.816 mm)
- Thread size: 3/8
- Terminals: 2, screw type, male
- Lug hole diameter: 0.16 in (4.064 mm)
Build and materials
- Finish: aluminum, plastic
- Duty: not continuous duty
- Condition: New
- Country of origin: China
In the box
One starter solenoid. The spring, mounting hardware and mounting bracket are not included, so plan on new hardware, as old pieces may not be reusable.
Frequently Asked Questions
Does the Standard Ignition SS-345 starter solenoid fit the 1986-1989 Mercedes-Benz 560SL V8 5.6L?
Yes. Standard Ignition SS-345 fits the 1986-1989 Mercedes-Benz 560SL V8 5.6L, which takes one solenoid.
Does the SS-345 starter solenoid come with a spring or mounting hardware?
No. Standard Ignition SS-345 is one starter solenoid; the spring, hardware and mounting bracket are not included.
What terminal type and thread size does this starter solenoid have?
This starter solenoid has two male screw terminals with a 3/8 thread size, and it is a 12 V unit.
What can a failing starter solenoid look like in daily use?
Signs can include a single click with no cranking, intermittent starting or no response at the key. A shop can test the starting circuit.
Why does this Standard Ignition solenoid use copper contacts?
Heavy-duty copper contacts reduce the effect of arcing and extend solenoid life. Pure copper battery terminal studs reduce resistance to permit higher current flow.
