Standard Ignition Starter Solenoid P/N:SS-581
Standard Motor Products
Standard Ignition SS-348 starter solenoid for the 1991-1994 Volvo 940 4-cylinder 2.3L and other vehicles switches battery current to the starter. This Standard Ignition starter solenoid is built around copper windings, contacts and terminal studs.
A starter that clicks without cranking, cranks slowly or starts only some of the time can mean the solenoid contacts are worn. A weak battery can also make the starter click without cranking, so these signs alone do not point to the solenoid.
As a direct-fit starter solenoid, it also suits the 1992-1994 Volvo 960 6-cylinder 2.9L and the 1985-1993 Saab 900 4-cylinder 2.0L and the 1991-1993 900 4-cylinder 2.1L. The 1991-1994 Volvo 940 4-cylinder 2.3L takes one, and this listing is one solenoid. For a BMW, Saab or Volvo not named here, find your year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One starter solenoid. Mounting hardware, a mounting bracket and a spring are not included, so plan on new hardware where the old pieces may not be reusable.
Interchange: 12411273228 · S5402 · 0331303033 · 331303033 · SS823 · ST323 · 7527856 · 1363546 · 13635461
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition SS-348 fit the 1992-1994 Volvo 960 6-cylinder 2.9L?
Yes. Standard Ignition SS-348 starter solenoid fits the 1992-1994 Volvo 960 6-cylinder 2.9L, and this listing is one solenoid. For any other car, look up its year and engine in the "Vehicles it fits" section.
Does this starter solenoid come with a mounting bracket or spring?
No. This listing is one starter solenoid. Mounting hardware, a mounting bracket and a spring are not included.
Which terminal types are on this 12-volt starter solenoid?
This starter solenoid has four male terminals of the screw and blade type. The lug hole diameter is 0.16 in (4.064 mm).
Can worn contacts inside a starter solenoid cause a click with no crank?
Yes, worn contacts can. Slow cranking or starting only some of the time are other possible signs, and a shop can test the starting circuit.
Does SS-348 replace part number SS823?
Yes. SS823 is one of the numbers the Standard Ignition SS-348 starter solenoid replaces, along with S5402 and 12411273228.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.