Standard Ignition SS-529 starter solenoid for the 1963 Chevrolet Suburban 6-cylinder 3.8L, 4.8L or V8 4.6L and other vehicles closes the circuit that sends battery power to the starter. It is a fender-mounted unit.
A solenoid on its way out can show up as a click with no cranking, a starter that engages only some of the time, or no response at the key. Before you replace it, look over the battery posts and cable ends with the engine off for corrosion or looseness, and inspect the solenoid terminals for burn marks or loose connections.
The 1968-1972 GMC K15/K1500 Suburban 6-cylinder 4.1L and the 1968-1972 C15/C1500 Suburban 6-cylinder 4.1L or 4.8L fit this starter solenoid, as do many other vehicles. One solenoid is needed per vehicle. If your vehicle isn't named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One starter solenoid with its spring. The mounting bracket and mounting hardware are not included, so plan on new hardware rather than reusing old pieces.
Interchange: S24 · 277628 · DR464 · ST11 · 1116255 · 1858200 · 1922176 · 1924754 · 820052
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the Chevy Suburban starter solenoid for a 1963 model with the 6-cylinder 3.8L, 4.8L or V8 4.6L?
Yes. Standard Ignition SS-529 fits the 1963 Chevrolet Suburban with the 6-cylinder 3.8L, 4.8L or V8 4.6L, and it takes one solenoid. For other years and engines, look up your vehicle in the "Vehicles it fits" section.
Does the SS-529 starter solenoid come with its spring and mounting bracket?
Yes, this starter solenoid includes its spring. The mounting bracket and mounting hardware are not included, so plan on new hardware.
What voltage and amperage is the Standard Ignition SS-529 rated for?
Standard Ignition SS-529 is a 12 V starter solenoid with a 50 A rating, one male screw terminal and two mounting holes.
Can a worn fender-mounted starter solenoid make a click with no crank?
Yes. A worn starter solenoid can click without cranking the engine, and burn marks on its terminals, seen with the engine off, can be another sign of wear.
Does this starter solenoid replace DR464?
Yes. DR464 is one of the numbers this Standard Ignition SS-529 starter solenoid replaces, along with S24 and ST11; the rest are on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
