Mevotech TTX Steering Tie Rod End P/N:TXMS25652
Mevotech TTX TXMS40672 front right outer tie rod end for the 2011-2026 Ford F-450 Super Duty and other vehicles links the steering linkage to the wheel. Mevotech TTX tie rod ends are built for high-usage commercial vehicles, SUVs, fleets and working trucks.
A worn steering tie rod end can show up as loose or wandering steering, uneven tire wear or a clunk when turning. None of these signs alone proves the tie rod end is at fault; a wheel alignment that is out of spec can feel much the same.
This front right outer tie rod end is a direct-fit replacement for the 2011-2026 Ford F-450 Super Duty, the 2011-2023 Ford F-250 Super Duty and the 2008-2023 Ford F-350 Super Duty. For another year or model, look it up in the "Vehicles it fits" section on this page. This listing is a single tie rod end, and the 2011-2026 Ford F-450 Super Duty takes one on its front right outer side; the front left is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One tie rod end with its dust boot and grease fitting.
Interchange: 19471880 · TA5728 · TO85362XL · 8C3Z3A131B · BC3Z3A131G · HC3Z3A131G · MEF367 · MEOE221 · ES800880 · ES4880E · MEOE236 · X15TE0419
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right 2011-2023 Ford F-250 Super Duty tie rod end for the front right side?
Yes. Mevotech TTX TXMS40672 is a front right outer tie rod end listed for the 2011-2023 Ford F-250 Super Duty. For another year or model, use the "Vehicles it fits" section.
Is this a 2008-2023 Ford F-350 Super Duty tie rod end as well?
Yes. The 2008-2023 Ford F-350 Super Duty is listed for this part, in the front right outer position.
What is the dust boot on the Mevotech TTX TXMS40672 made of?
The dust boot is neoprene, and a patented sealing ring locks it onto the ball joint housing. The bearing inside is sintered metal.
Does this tie rod end come with a grease fitting?
Yes. The 180 degree SAE grease fitting and the dust boot are included, and the joint comes pre-greased.
Does the Mevotech TTX TXMS40672 replace part number 8C3Z3A131B?
Yes. 8C3Z3A131B is one of the numbers Mevotech TTX TXMS40672 replaces; others include BC3Z3A131G and HC3Z3A131G.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.