Sunsong Brake Hydraulic Hose P/N:2204357
Keep brake fluid moving to the front left wheel with the Sunsong brake hose, part number 2201821. It is a direct-fit replacement for the front left position on the 2011-2017 Chevrolet Silverado 2500 HD, Chevrolet Silverado 3500 HD, GMC Sierra 2500 HD, and GMC Sierra 3500 HD. See the "Vehicles it fits" section for engine details.
A flexible brake hose connects the rigid brake lines to the brake at the wheel. It carries pressurized brake fluid and flexes as the suspension and steering move. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it designs its hoses for exact form, fit, and function.
Signs that a brake hose may need replacing include a cracked, chafed, or swollen hose covering, brake fluid seeping at the hose or its fittings, and a soft or spongy brake pedal. If a failed hose is the cause, this part replaces it. Bleed the brake system after installation as directed by the vehicle service information.
Interchange: 1474-480685 · 150.66142 · 350-47338
1474480685 · 15066142 · 35047338 · 18J4576 · BH621694 · SP11132 · BHA621694 · H621694 · 777478 · 25882061 · 84260051 · 682931 · BH382962 · BH144574
This part cross-references / interchanges with the following part numbers:
Which position does Sunsong 2201821 fit?
It is cataloged for the front left position on the 2011-2017 Chevrolet Silverado 2500 HD and 3500 HD and the 2011-2017 GMC Sierra 2500 HD and 3500 HD.
Does this brake hose include copper washers?
Sunsong includes new copper washers with its brake hoses that use banjo end fittings, so the connection can seal properly.
What standards does this Sunsong brake hose meet?
It meets or exceeds DOT, FMVSS 106, and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
What are signs a brake hose may need replacing?
Possible signs include a cracked or swollen hose covering, brake fluid leaking at the hose or its fittings, or a soft, spongy pedal. Diagnose the cause first, because other brake parts can cause similar symptoms.
Do the brakes need to be bled after installing the hose?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation. Follow the vehicle service information for the correct procedure and brake fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.