Keep firm, responsive braking flowing to the rear wheels with the Sunsong Brake Hydraulic Hose 2204995, a direct-fit rear brake hose for the 1998-2000 Volvo V70 and 1999-2000 Volvo S70. It routes pressurized brake fluid from the chassis hard line to the wheel end while flexing with suspension and steering movement, so pedal pressure reaches the rear brake as intended.
- Rear application: serves the rear-brake hydraulic circuit on the listed Volvo models.
- Flexible hydraulic link: carries pressurized brake fluid between the rigid line and the moving wheel assembly, absorbing chassis and suspension travel.
- Signs this hose may need replacing: visible cracking, bulging, chafing, or fluid seepage at the fittings; if a restricted or leaking hose is the cause, a soft or spongy pedal can follow.
- Direct-fit replacement: serves as a direct-fit replacement hose for the listed Volvo applications.
Inspect and bleed the brake system per the vehicle service information after installation, and diagnose the cause of any braking concern before replacing parts.
Interchange: 18J4801 · 1474-04837 · 147404837 · BH620261 · SP11411 · BHA620261 · 150.39315 · 15039315 · H620261 · 71039 · 609270 · 350-27038 · 35027038 · BH383234 · 3524397 · 9173855 · 9209896 · Manufacturer part number 2204995 · Part Eazy SKU 2204995
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does this brake hose fit?
It is a direct-fit rear brake hydraulic hose for the 1999-2000 Volvo S70 and the 1998-2000 Volvo V70. Check the Buyer's Guide tab to confirm it matches your vehicle.
Which brake position is this hose for?
This is a rear brake hydraulic hose for the listed Volvo applications.
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the rigid chassis line to the wheel-end brake while flexing with suspension and steering movement, so pedal force reaches the brake.
What are signs this hose may need replacing?
Look for cracking, bulging, chafing, or fluid seepage at the fittings. If a restricted or leaking hose is the cause, a soft or spongy pedal can also result.
Do I need to bleed the brakes after installing it?
Yes. After opening the hydraulic system, bleed the brakes and inspect for leaks following the vehicle service information before driving.
Write a Review