Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20380
Mevotech Supreme CMS101277 front right lower control arm with ball joint for the 2013-2019 BMW 640i Gran Coupe and other vehicles connects the wheel assembly to the vehicle body and pivots at its ball joint as the suspension moves. It is a Mevotech Supreme suspension control arm, also called a control arm and ball joint assembly, with the bushings already fitted.
Clunking over bumps, uneven tire wear or steering that wanders can come from several suspension parts. With the engine off, look at the bushings for cracked or torn rubber before deciding it is this arm.
This Mevotech Supreme lower control arm also fits the 2013-2019 BMW 650i Gran Coupe and the 2012-2018 BMW 640i, among the vehicles it covers. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One control arm with ball joint and bushings, plus the nylon locking nut. This listing is one arm for the front right, which takes one; the front left is a separate part, and both sides are normally replaced together.
Interchange: 102-7747 · 522-886
19327266 · 31126775972 · MGS101277 · TC2822 · CB14414 · CB14414PR · CA4980 · 4CB101326 · RK641510 · C6GS101277 · GS101277 · 2606859 · 1772101 · 30036241 · X05CJ1114 · JTC2207
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme CMS101277 fit the 2013-2019 BMW 640i Gran Coupe?
Yes. Mevotech Supreme CMS101277 is the front right lower control arm with ball joint for the 2013-2019 BMW 640i Gran Coupe. Use the "Vehicles it fits" section to check other models.
Does this control arm come with the ball joint and bushings already installed?
Yes. Mevotech Supreme CMS101277 includes the ball joint and rubber bushings, plus a part-specific nylon locking nut for the ball joint.
Is the ball joint on this control arm pre-greased, and what stud does it use?
Yes, the ball joint is pre-greased. It is a press-in ball joint with a threaded stud.
What does the nylon locking nut on this control arm do during installation?
The part-specific nylon locking nut that comes with Mevotech Supreme CMS101277 speeds up ball joint installation. Labor Saver designs, tools and hardware are intended to make the job faster and easier.
Is 522-886 the same as the Mevotech Supreme CMS101277 control arm?
Yes, 522-886 is listed as an interchange number for Mevotech Supreme CMS101277. The 102-7747 number is listed with it too.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.