Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20380
Mevotech Supreme CMS101357 front right lower control arm with ball joint for the 2014-2019 BMW 640i xDrive Gran Coupe and other vehicles links the front right wheel to the vehicle and holds the ball joint at the wheel end. This Mevotech Supreme suspension control arm is sold as a control arm and ball joint assembly, so the ball joint comes attached.
A clunk over bumps, uneven tire wear or a loose, wandering feel in the steering can mean a worn control arm or ball joint. Before you replace this part, rule out a worn tie rod, strut or shock, a wheel out of alignment and tire problems, since any of them can bring on a clunk or uneven wear too.
This front right lower control arm is a direct-fit replacement for the 2014-2019 BMW 640i xDrive Gran Coupe, the 2013-2019 BMW 650i xDrive Gran Coupe and the 2015-2019 BMW Alpina B6 xDrive Gran Coupe. If your BMW is not among them, find its year and model in the "Vehicles it fits" section on this page.
Fit and size
Build and materials
One control arm with its bushings, dust boot, ball joint and locking nut. This listing is one arm for the front right, and that side takes one; the front left is a separate part ordered on its own, and both sides are normally replaced together.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Mevotech Supreme CMS101357 fit the 2013-2019 BMW 650i xDrive Gran Coupe?
Yes. Mevotech Supreme CMS101357 is the front right lower control arm with ball joint for the 2013-2019 BMW 650i xDrive Gran Coupe. Other vehicles are in the "Vehicles it fits" section.
Does this Mevotech Supreme lower control arm include the ball joint?
Yes. Mevotech Supreme CMS101357 comes with the ball joint, rubber bushings and a rubber dust boot, so the arm is sold as one assembly.
Is this front right control arm made of aluminum or steel?
Aluminum. The control arm is aluminum, while its bushings and dust boot are rubber.
Is a torn dust boot a sign a control arm's ball joint is wearing out?
A torn dust boot, leaking grease or cracked rubber bushings can mean wear in the arm or its ball joint. Look with the car parked, and have a shop inspect it promptly.
Does the ball joint on this control arm come with a locking nut?
Yes. A part-specific locking nut is provided with the ball joint to speed up installation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.