Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS301100
Mevotech Supreme CMS101529 front left upper control arm with ball joint for the 2018-2025 Volvo XC60 and other vehicles connects the wheel assembly to the vehicle body and pivots as the suspension moves. As a control arm and ball joint assembly, it replaces the arm and its ball joint together.
A worn upper arm can show up as a clunk over bumps, uneven tire wear or loose steering feel. A torn dust boot or cracked bushing rubber, seen with the engine off, can point to wear. Steering and suspension parts share symptoms, so trace the sign to its source before replacing the arm.
It fits the 2018-2025 Volvo XC60, the 2016-2025 Volvo XC90 and the 2020-2021 Volvo V90 Cross Country. The front axle takes one on each side; this listing is the left, the right is a separate part, and the pair is normally replaced together.
Fit and size
Build and materials
One front left upper control arm with ball joint, bushings, dust boot, locking nut and mounting hardware.
Interchange: 19472600 · 3CB10832 · GS101529 · 2608851 · X53CJ0987 · 31360630 · 313606300 · 32395242 · 323952420
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 2016-2025 Volvo XC90 control arm for the front left upper position?
Yes. Mevotech Supreme CMS101529 fits the 2016-2025 Volvo XC90 at the front left upper position. The right side is a separate part.
Does this 2018-2025 Volvo XC60 control arm cover both sides of the car?
No. This arm is for the front left upper position only. The right side is ordered separately, and both sides are normally replaced together.
Does the Mevotech Supreme control arm include the ball joint and bushings?
Yes. CMS101529 comes with the ball joint, bushings, a rubber dust boot, a locking nut and mounting hardware. The ball joint has a threaded stud, and the assembly is pre-greased.
What is this Mevotech Supreme suspension control arm made of?
The control arm is aluminum, with rubber bushings and a rubber dust boot. A protective surface treatment helps resist rust build-up.
Is 3CB10832 an interchange number for this control arm?
Yes. 3CB10832 is listed on the Interchange line for Mevotech Supreme CMS101529, along with numbers such as 19472600 and GS101529.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.