Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20380
Mevotech Supreme CMS25103 front right upper control arm with ball joint for the 1997-1999 Dodge Dakota and other vehicles joins the front right wheel to the frame. The ball joint is part of the arm, so one piece covers both.
Clunking over bumps, uneven tire wear or steering that wanders can mean the arm, its bushings or its ball joint is worn. Before you replace this control arm, rule out worn tie rod ends, a loose wheel bearing and tired shocks, which can produce similar noise or looseness. Plan on doing both front upper arms at the same time; this listing holds one arm, the front right.
It is a direct-fit replacement as a 1997-1999 Dodge Dakota control arm and as a 1998-1999 Dodge Durango control arm, and it meets or exceeds OE specifications.
Fit and size
Build and materials
One front right upper control arm with ball joint, rubber bushings, mounting hardware, a castle nut and a cotter pin. This listing is one arm, and the front right takes one; the front left is ordered separately.
Interchange: 622.67044 · 520-312
19290316 · TC6558 · 5166346AA · 52039410 · 52039410AB · CB81188 · CB81188PR · CA10199 · FCA675 · CAK620262 · CK620262 · K620262 · RK620262 · 30034178 · RP12049 · 5021233 · SRK620262 · JTC2345
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Mevotech part a Dodge Dakota upper control arm for 1997-1999?
Yes. Mevotech Supreme CMS25103 is a front right upper control arm for the 1997-1999 Dodge Dakota. The front left is a separate part.
Are bushings and mounting hardware included with this front right upper control arm?
Yes. Rubber bushings and mounting hardware come with this arm, along with the castle nut and cotter pin for the ball joint.
What is the Mevotech Supreme suspension control arm made of?
Mevotech Supreme CMS25103 has a steel control arm with rubber bushings, plus a protective surface treatment to prevent rust build-up.
How can I tell if a front upper control arm is wearing out?
Clunking over bumps, uneven tire wear or steering that wanders can come from a worn ball joint or bushings. A shop can test ball joint play safely.
Is the ball joint on this control arm and ball joint assembly pre-greased?
Yes. The ball joint is pre-greased and has a threaded stud, so it secures to the vehicle with the supplied castle nut and cotter pin.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.