Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS301207
Mevotech Supreme CMS251236 front right upper control arm with ball joint for the 2016-2021 Jeep Grand Cherokee and other vehicles links the front wheel to the chassis and carries the ball joint. Some catalogs list it as a control arm and ball joint assembly.
A clunk over bumps, uneven tire wear or a loose steering feel can mean the ball joint or arm has worn. These signs alone do not prove this arm is the problem, since a worn tie rod end can cause a similar clunk or loose feel.
Besides the 2016-2021 Jeep Grand Cherokee, this part fits the 2016-2025 Dodge Durango and the 2022 Jeep Grand Cherokee WK. This listing is the front right arm; the left side of that axle is a separate part, and both sides are normally done at the same time.
Fit and size
Build and materials
One control arm with ball joint and mounting hardware. This listing holds one arm, and the front right position takes one.
Interchange: 810-582823B
19429442 · TC6794 · 68224238AB · CB96038 · 68282328AA · 68291036AA · 68291036AB · RK623433 · RK623639 · 2608703 · 3CB25377 · X13CJ0797
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this upper control arm right for the 2016-2021 Jeep Grand Cherokee?
Yes. Mevotech Supreme CMS251236 is the front right upper control arm with ball joint for the 2016-2021 Jeep Grand Cherokee. It is a right-side part only; the left side is ordered separately.
Is this the right control arm for the 2016-2025 Dodge Durango?
Yes. This front right upper control arm fits the 2016-2025 Dodge Durango, and the left side of the axle takes its own arm.
What comes with the Mevotech Supreme control arm?
CMS251236 comes with a 90 degree SAE grease fitting, a part-specific locking nut and mounting hardware. This listing holds one arm, and the front right position takes one.
Is the Mevotech Supreme suspension control arm made of steel?
Yes. The control arm is stamped steel with a protective surface treatment against rust, and its bearing is sintered metal.
Is this control arm pre-greased, and can it be greased again?
Yes. It is pre-greased and greaseable, and the 90 degree SAE grease fitting is included for later servicing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.