Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS101183
Mevotech Supreme CMS501125 front left lower control arm with ball joint for the 2013-2015 Chevrolet Malibu and other vehicles connects the steering knuckle to the subframe. This Mevotech Supreme suspension control arm is also called a control arm and ball joint assembly.
A clunk over bumps, uneven tire wear or loose-feeling steering can mean a worn ball joint or bushing. These signs alone do not prove this arm is the problem, since a worn strut mount can make similar noises.
Vehicles it fits include the 2013-2015 Chevrolet Malibu, the 2010-2016 Buick LaCrosse and the 2011-2017 Buick Regal. This listing is one arm for the front left; the front right lower arm is a separate part, and both are normally replaced together. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, 90 degree SAE grease fitting, application-specific pinch bolt and locking nut.
Interchange: 810-425993B · 622.62068 · 622.62806 · 521-951
88879216 · 22854825 · TC5610 · CB91233 · CB91233PR · CA12510 · 13360021 · 20835936 · 23354433 · RK641500 · 2606899 · 30034574 · 5CB50326 · SK521951 · X07CJ6289 · TK641500
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 2013-2015 Chevy Malibu control arm?
Yes. Mevotech Supreme CMS501125 is the front left lower control arm with ball joint for the 2013-2015 Chevrolet Malibu, and that car takes one on this side.
Is the 2013-2015 Chevrolet Malibu lower control arm also the right one for the 2010-2016 Buick LaCrosse?
Yes. Mevotech Supreme CMS501125 is also listed for the 2010-2016 Buick LaCrosse in the front left lower position. Use the "Vehicles it fits" section to check your exact model and engine.
What is the Mevotech Supreme lower control arm made of?
This control arm is aluminum, with a rubber bushing, a sintered metal bearing and a neoprene dust boot. The ball joint stud is grooved.
Does this control arm come with the ball joint, bushings and grease fitting?
Yes. Along with the ball joint, bushings and dust boot, it includes a 90 degree SAE grease fitting plus an application-specific pinch bolt and locking nut.
Can the ball joint on this Mevotech Supreme CMS501125 be greased later?
Yes. Mevotech Supreme CMS501125 comes pre-greased and has a 90 degree SAE grease fitting for later servicing. Its BiMetallic sintered bearing is built to be greased.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.