Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS101441
Mevotech Supreme CMS501185 front right lower control arm with ball joint for the 2014-2018 Chevrolet Silverado 1500 and other vehicles connects the wheel end to the frame through a press-in ball joint. This Mevotech Supreme suspension control arm, a control arm and ball joint assembly, includes the ball joint and rubber bushings.
A clunk over bumps, loose-feeling steering or uneven tire wear can point to a worn ball joint or bushings. Other suspension parts make similar noises, so have a shop inspect the boot, the rubber bushings and the ball joint play before you replace the arm.
This control arm fits the 2014-2018 Chevrolet Silverado 1500, the 2014-2018 GMC Sierra 1500 and the 2015-2020 Chevrolet Tahoe, with one arm used at the front right lower position. This listing is a single arm; the front left is a separate part, and the two sides are normally replaced together. Driving something else? Look for your own truck or SUV by year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, grease fitting, mounting hardware and a part-specific locking nut.
Interchange: 820-610114B · 520-806 · 527-064
19357089 · 22853474 · 84114506 · 84114508 · CB91374 · CB91374PR · CB92054 · CA16439 · GCA16439 · GCA16514 · 22994469 · 23420262 · 84031133 · CK620889 · RK623299 · 2608235 · 30034620 · 11CB50562 · X07CJ1071
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Tahoe control arm right for a 2015-2020 Chevrolet Tahoe?
Yes. Mevotech Supreme CMS501185 fits the 2015-2020 Chevrolet Tahoe as the front right lower arm. For other trucks and SUVs, look in the "Vehicles it fits" section.
Are these 2014-2018 Chevrolet Silverado 1500 control arms for both sides of the truck?
No. Mevotech Supreme CMS501185 is the front right lower arm only. The front left side uses its own control arm.
What comes with this Mevotech Supreme control arm besides the arm itself?
It includes the ball joint, rubber bushings, a dust boot, a 180 degree SAE grease fitting, mounting hardware and a part-specific locking nut.
What is this front right lower control arm made of?
The control arm is aluminum. It has rubber bushings, a sintered metal bearing and a neoprene dust boot.
How can I tell if the ball joint on this control arm is worn?
A clunk over bumps, loose-feeling steering or uneven tire wear can point to a worn ball joint. A shop can inspect the boot for tears or leaking grease and measure ball joint play.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.